besides buying the NC3 Japhar DM800se I also have to change the socket sim?

Generally this is only necessary on some DM800HD boxes, where the sim was glued. But most of boxes doesn't need it.

Admin

hi, i installed the japhar sim that I just arrived and I installed ssl 84 onepli 4.0, now I wanted to know how to collegari box in wifi, in the network settings I found only ethernet thanks a lot

Good, perfect.

Read this, on the Drivers section (DVB-T),

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=10030#Post10030

Admin

thanks for the answer, I settled for the digital key. now in order to connect the decoder in wifi how do I proceed? in the settings only to me the possibility to connect via lan! thank you so much

It should be recognized automatically if it's a standard Wifi Dongle,

What is the PID:VID of it ?

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=118&page=1

Admin

ok thanks, I'll try tonight, I wanted to ask another info, I loaded my personal IPTV list, the list is loaded and I find in the bouquet, but I do not part the channel vision? you tell me why? you could say also user and pass for access to telnet? thank you so much for your help.

Ok, if it's not automatically recognized we would need the VID:PID of the Wifi module/dongle to find out which chipset it is and if it needs to be installed via the feeds. Most commons are auto-installed at boot.

Concerning your second question, it's probably due to the format of the file, you need to take a look at it and be sure it's properly formatted. You can use tools such as Enigma-TV IPTV Generator to manage such type of lists, or DreamSet, DreamEdit, etc.

Enigma-TV IPTV Generator :
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3478#Post3478

Admin

you could say also user and pass for access to telnet? thank you so much for your help

Default for our OpenPli images are "root" and no password (Enter/Return).

Admin