Good Evening,
I have an old Dreambox 800hd clone and have a Ferrari Japhur sim installed with SSL82F. Its a long time since I re-flashed my box with newer firmware as I always seemed to have to recover the box with a no CA error until I found a firmware that worked. I would like to update the box with something like Open PLi to allow me to get IPTV. Would anyone know what flash file I would need or if I need to update anything else before trying the newer firmware?
Many thanks, Mark

Dear Shaggs,

You can easily update your box to the newest images supporting IPTV, you need to do exactly as explained on the step by step Tutorial link below. Just be sure you have a Japhar Sim NC3 for DM800HDpvr, and then you are ready to enter the Japhar Image world with support of Satellite and USB Dongles such as for Terrestrial, and IPTV.

Link : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=11286#Post11286

Admin

Many thanks. I'll give it a go and report back.

;o)

Admin

Hi, for some strange reason my box ip address comes up as 192.168.2.110 when I re-boot the box whilst holding the power button. It should be 192.168.0.24 or similar. I have tried re-setting this using japherflasher but it still seems to re-boot with the same ip address even after I change the remote ip to 192.168.0.24. Am I doing something wrong or is there a way to force the ip to change?
Regards,
Mark

This is coming from your Router/Modem, check your router configuration.

Just try to flash via the Web Interface, it's much easier.

Admin