openpli-6.0-dm800se-20170702-japhar-ssl84j.nfi

OpenPLi 6.0 release candidate.
-Build from OpenPLi git source develop branch
-Gstreamer 1.12.1
-dedicated feed server

By Gjstroom

MEGA : https://mega.nz/#!g7xFAAQD!6Pk4t-0wOIqjOVS4EF_lgP8dfmX380aMulfBVCJz3lA

Quick boot and work. But need feeds now...
update: Default feed from "Software manager - install packages" - is active.

I installed this image and have problem with Ciefp channel list.Now i only have some of the channels but most of the HD i dont have.

If you still have them on the list (At least "empty" positions with noname), then just rescan the satellites and it would fix your problem.

Admin

I have channel name and position but it looks light darker like there is no tuner and i cant open it.
I will try that later.Thanks.

Check the Satellite configuration, it seems the satellite is not right that is set is not available or not set or different from the one you originally had,

Admin

Is sattelite.xml correct?

Standard one from OpenPLi, you can always replace it.

Admin

Im using motor list and i configured my tuner from 55e to 30w.In total i have 34 stored positions.I just scan astra 19.2 manual and after that now i have astra channels on bouqet of the ciepf list.
I also tryed other lists,with satvenus and predrag list everything is ok,problem is only with Ciepf that im using.Looks like solution is to scan every satellit to get working bouqet on Ciepf list.
On Open Pli 4.0 i didnt have problem everything worked great in that list.

Then try the DM800HDse OpenPLi 5.0 IPTV version, probably it would work better.

Admin