Thank you for your advise, we will update the Tutorials to have also the DM800HDseV2 links, that is a new OS/Box of last week for Japhar Team and Support ;o)

Admin

Sorry for posting on this thread, but is the Japhar sim for DM800se v1 compatible with the DM8000 se v2 box?
I already have a v1 sim and want to know if I can use it in a v2 box.

Yes, it is compatible, but you will need to reflash it with the DM800HDseV2 Japhar OS,

Admin

Do I need a card reader to do this or can I do it in the box?

You need a PC/SC Reader/Programmer, like the GCR2 we are using, that you can find at http://www.japhar.com/japhar/

TS

Sorry for the delay in reply, but can I use an older reader/programmer like the phoenix smartmouse?

These are not enough reliable to be used, and could destroy the sim card.

You need to use a fully supported PC/SC Smartcard reader, like the GCR2 we are using (and even not all PC/SC are reliable ;o((( ).

The PC/SC Smartcard Readers are used for banking, PKI, Health Card, etc etc, so it should be not too difficult to find one.

Admin

Hi
Please help me to activate trial tuner in my Sunray SR4V2 .Now I have the japhar sim in the box and openpli-enigma2-5Plus-dm800sev2 instaled.I try to install via plugins pannel the correct driver trial tunner but the message is incompatible with the box.How to proceed?
Tnx

You need to install this ipk, for DM800HDseV2,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=13324#Post13324

Admin

Hi
I've tried with trialtuner-bobsilvio-compiled_2.0b_all in openpli-enigma2-6Plus-dm800sev2 and no change.Only DVB S2 works.What am I doing wrong? Please help!!
The message is 'refusing to load file tmp/trialtuner-bobsilvio-compiled_2.0b_all as is matches the instaled trialtuner-bobsilvio-compiled_2.0b_all

Reinstall the image, if you played with drivers and installed few, before the right one indicated above, it WILL NOT WORK.

So reinstall a clean image and then install then only the driver indicated above,

Admin

Hi
Is the correct driver 'trialtuner-bobsilvio-compiled_2.0b_all' ?In the link that driver is for V2!
Tnx in advance

Use the driver/ipk from this topic for DM800HDseV2,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=13405

Admin

Hi

I am very dissapointed I did exactly as it appears in the post I've tried all kind of img (pli,blackhole etc).

It works only dvbs2. With sim 2.2 the trial tuner was functional.

The driver is exactly the same as for any other box/sim, so you should be in the exact same situation as you were before.

Do you have on the Receiving Sat/Ter Menu the 3 positions ? Sat, Terrestrial and Cable ?

New Installations always get some tricky situations at start then once all is setup properly it works perfectly.

Admin

Menu should be like this,

Yes virtualy i have trial tuner installed but not works. Only dvbs2 work perfect. The dvbc message is 'tune failed' and I can't scan .Do not alow me to put 1 in front of freqvency ...have only 3 digits aviable .Ex 341 fec 6900 quam 64
You have attached my settings that worked perfect with sim 2.2

Ok, did you replaced the cable.xml file in /etc/tuxbox ? Probably the "standard" one is not for your country or is just missing.

See below, I am preparing a "ready to use" image for you and members here with Triple/Trial tuner and A867 USB DVB-T Dongle Support, as well as built-in Wifi, but you will need to add your cable.xml file, as it's not there on the standard installation.

Admin

P.S.: I also checked your settings rar file, and there is no cable.xml file in it.

I have cable in settings see the printscreen in att.I can't automatic scan so how to make cable xml.I don't understand at all what to do

Please use the image below, and add your cable.xml file that is in use for your Cable Operator into /etc/tuxbox,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=13422#Post13422

Admin

I have in tuxbox cables xml .You have in attach

Then you should put the .xml file into the /etc/tuxbox folder and reboot your box, and I think it will work,

Admin