Key Features:
Dreambox OS
Dreambox API
Dual-Core 12K DMIPS CPU
2 x HDMI 2.0 (In - Out)
3" Custom Color-LCD
Touch on/off
MPEG-2/H.264 Decoder (Full HD)
H.265 Decoder (Ultra HD)
1 x Smartcard Reader
1 x SD-Card Reader
2 x Common Interface Slot
2x Tuner-Slots
2 GB RAM
8 GB Flash
Gigabit-Ethernet
USB 3.0
Mini-USB-Service-Port (Flash Rescue)
S/PDIF-Uscita
Automatic Scan
2,5" HDD (optional) high 15 mm
WLAN (optional)
Web Interface per PC und Smartphone
DiSEqC 1.0, 1.1, 1.2, USALS, Unicable
As a tuner, there is now a huge selection of alternatives:

the standard DVBS2 Twin tuner,
the cable / terrestrial Twin tuner DVBC/T2 Twin,
the Sat cable terrestrial tuner DVBS2x TripleTuner and
the new FBC tuner (several tuners in one).
I have notice that few models are coming in shops next friday prices are depending by configuration described above and starting from 349€ up to 449 €

http://www.dreamboxupdate.com/opendreambox/2.5/experimental/images/dm900/

Is there anybody who want to sell one DM920? I am interested if so.

Hello Alfred,

You should ask on the Buy/Sell section,

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=20&page=1

Admin

Hi again, I am very satisfied with my DM920uhd. BUT there is one thing. I am running your latest OpenPli 8.1 but there is nochoice to make between WLAN and LAN connection. Is there any possibility to make this. I would prefer WLAN.

Best regards!

You can install the wireless plugin from the feeds, and then the driver for the USB Stick you would use (need PID:VID to find the chipset and the install driver for that chipset from feeds).

Wifi section : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=118&page=1

Admin

Thanks!

Trying to find img for my DM920uhd. But where?

Here,

DM920UHD : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=230&page=1

Admin

Hmm, I have problem with my DM920uhd. RESCUE MODE Waitinig for DHCP /. But nothing happens. The / just rotate. What can I do to load new img?

Turn off/on your router/modem, and also your DM920UHD, it means it doesn't get the IP address from DHCP/Router.

Check your cables as well as your switches if you have any between the router/modem and the Dreambox.

Admin

Hi, I am a newbie here and I have a problem with my DM920. I wanted to flash a new software and suddenly I got a green screen an every thing stopped. I tried to connect with Putty ans I get this message: single board MEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed
Is there any method to flash a software for the device.
Thanx in Advance....

user: kshfahmy

You can use a tool called optiflasher,

Admin

Newbie, new DM 920 UHD, with double DVB-T2 DVB-C tuner.
Bought a extra double tuner DVB-T2 DVB-C, to get 4 active DVB-C tuners.

Now when start one recording, swap channels stops working, only some channels works.
Without that extra tunercard everything works as long as I only make one recording.

Trouble I have no real pdf manual, only quick start guide.
And I'm not familiar with DreamBox OS, need manual for that too.

Before DreamBox, I was using Miraclebox premium twin HD, with OpenATV nightly (but broken trash now)

Looks like some software support buggy, for multiple tuners. I seen this in past,

It would be interesting to know if you have the same issue on various images from DMM and Open. Can you please test and let us know ?

Admin

Now everything works ! I bought an antenna amplifier with 8 outputs, one input. so all 4 antenna sockets on the dreambox got their own antenna cable.

So then it was an Sat installation that needed to be in the line of the need of your box, great to know that the software is working properly.

Thank you for your feedback !

Admin