How can get one image OpenATV 6.0/6.1 with tuner ? or sim 2.30 ?

You have 2 solutions,

1) Ask your supplier/seller and the Team Sim 2.30 / DM520HD Asian Clone, to build/patch you these images

2) Replace your sim by the Japhar DM520HD Sim, as Japhar Team Supports the box with the Japhar Sim, check here for the Japhar DM520HD Sim http://www.japhar.com/japhar/

Admin

yes problem is whem put image for 2.30 there is impossible to conect tuner configuration

You need to use the image adapted to the sim inside your box, otherwise the tuner will not work (it's normal).

Admin

its not work even with official images from official page for 2.30 all images from 520 all same thing

Then change sim if the sim 2.30 doesn't work. Remember that we are here on the Sim Japhar Forum... so we don't support other's Team, they have to do their job !

Are you sure you have a box with a Sim 2.30 inside ???

Admin

Yes i send it to repair when i try update to secondstage loader 103,i also put now try images for japhar sim but same problem also with tuner othwr work all ok

Japhar images will only work if you have a Japhar sim in your box. So as actually you seems to have a Sim 2.30 on that box, use Sim 2.30 images, and if these doesn't work... I don't know, contact your seller again. As wrote we are Japhar Sim Forum, we don't support other's Sims naturally...

You can buy the Japhar Sim for DM520HD here, only with that sim installed you will be able to use Japhar DM520HD images.

See here : https://jam3.japhar.com/japhar/index.php/product/dm520hd-nc3-japhar/

Admin