How to flash zImage-rescue partition to DM900UHD/DM920UHD

1. Copy this .bin to /tmp
2. Open telnet and login (via the IP address)
(if you have no IP, then you must use the other way via Putty Serial)
3. flash-rescue /tmp/*.bin
4. Wait 3-5 minutes. Wait for DONE info!
5. Power OFF to 10 sec and power ON.
6. Done. You have new rescue loader.

Tip :

DM900UHD :
Code:
wget http://www.dreamboxupdate.com/opendreambox/2.5/experimental/images/dm900/zImage-rescue-3.14-r0-dm900-20181002.bin
(Latest DM900UHD) :
Code:
wget http://www.dreamboxupdate.com/opendreambox/2.5/experimental/images/dm900/zImage-rescue-3.14-r0-dm900-20201201.bin


DM920UHD :
Code:
wget http://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm920/zImage-rescue-3.14-r0-dm920-20181127.bin
(Latest DM920UHD) :
Code:
wget https://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm920/zImage-rescue-3.14-r0-dm920-20201201.bin


You get the latest .bin file from the link below,

For DM900UHD :
- Link : http://www.dreamboxupdate.com/opendreambox/2.5/experimental/images/dm900/
- or download zImage-rescue-3.14-r0-dm900-20180209.bin

For DM920UHD :
- Link :
http://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm920/index.php
- or download zImage-rescue-3.14-r0-dm920-20181127.bin

To launch the flash of rescue, use command
flash-rescue
+ rescue bin name (like zImage-rescue-3.14-r0-dm9xx-20170113.bin)

Admin




TIP :

- If you have a login with username/pass, do the way explained on this post.

- If you have NO login with username/pass requested... then you need to go the way of the post below
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=17922#Post17922

Read also : https://dreambox.de/board/index.php?thre...5367#post175367


Attachments
rescue.jpg (591 downloads)

_________________________