Fault finder pinout P1100/DM500HD

The voltages are rounded off, measured from two working PCBs.
Example,
2.4V, may also be 2.380v.

Since this is the first drawing, can the references to, change in the future.

It does not cover all power sources, but the ones that go to the P1100.
In any case, better something than nothing.
Good luck.

(Thank you to Johnny_B for publishing it)

All the best about hardware/support from Johnny_B, link :
http://jb8a8f8.com
http://jb8a8f8.nl