Hi all, unfortunately in the hurry I loaded "OpenPLi_4.0_Japhar_DM8000HD_wIPTV_BETA12-OS.rar" in my Dm8000 with Ferrari sim now exit "* ERR01: NO CA FOUND"
I tried with ferrari filler and with Japharflasher V1.0 but the programs do not see the decoder

You have two ways to fix this,

- Use JapharFlasher with RS232 cable to PC (with RS232 port) + RJ45 cable to Router, and flash a compaitble SSL to your DM8000HD

- Replace the old Ferrari Sim by a Japhar Sim and your box will work again great (and support as well the new Kernel 3.2 drivers).
See : https://jam3.japhar.com/japhar/index.php/product/japhar-dm8000hd/

Admin

JapharFlasher does not see the decoder always comes out err01 no ca found

Then it could mean that your RS232 board is dead on the DM8000HD or your PC doesn't work with RS232 or your cable RS232 is not good...

Easiest way, is to get asap a Japhar Sim, so you can replace the old Ferrari by the Japhar, that is compatible with the image you just loaded... and your box will boot fine with it.

If you buy the sim by tonight, tomorrow morning it will be on the post. So you can get very soon your new sim and recover your box.

Admin