DreamTV Mini Ultra HD Android 9.0 IPTV Streamer Dual Wlan Bluetooth Smart TV Box

Technical specifications:
Quad Core Amlogic S905X2 processor
4K 2160p resolution 60fps
H.265 decoder UHD
16 GB Flash
2 GB RAM
Dual Wifi 2.4 / 5GHz
DreamTV OS
Bluetooth
1x HDMI 2.1
1x digital audio output S / PDIF
1x RJ 45 socket (LAN) 100 / 100Mbits
1x SD card reader
1x USB 3.0
1x USB 2.0
1x USB service port
power switch
Dimensions: 131x75x25 mm

Launch December 20th, 2019
Around 90€

Hi !
I have bye an H96 max x3 amlogic s905x3 Android TV Box.
Looks like DreamTV Mini Ultra .
can i Install DreamTV firmware on this or will it brick the box ?

Smokey

It will brick your box, the firmware is destinated to the hardware it was compiled for.

Admin

OK
Thanks

Smokey

Hi again !

I have now a DreamTV Mini Ultra HD.
I have added URL to Xtream Server(GenIPTV) and works fine.

Try to add one of my DM800Se with OpenPli 7.2 v.6 but no channels show up. (Enigma2 STB)

Is this images compatible or is I doing something wrong

Smokey

DMM images use different coding, 1 instead of 4097, on the Channel links. Check how is composed the link, as the DMM should be capable of reading the video stream from the remote box using openpli.

Admin

Hello
Is it possible to set connection2 source to DreamTV Mini from my DM525 or DM Two with OpenPli 8xStar as with DreamOS and howto set up

Smokey

You can stream the content with the Virtual Tuner from the originate box,

Admin

howto set up on my dm525 openpli 8xstar orginal ?
no problem with dreamos

Smokey

You cannot load Android on boxes that are not DreamOne/Two or this Mini (that is DreamOne hardware without Tuner),

Admin

That's what I thought too, only works with DreamOS, thanks

Smokey

It's not because of DreamOS, but it's the hardware architecture of the DreamOne/DreamTwo/DreamMini (Which have Open images as well as DreamOS/DMM images), that is the same hardware as the Android Boxes. The DM52x boxes have MIPS32... not aarch64 (hardware), even the DM9x0 boxes that are arm have not Android.

Admin

Ok, then I understand why, going back to my DM Two and does that mean I can run OpenPli on it and have connection2 to my DreamTV Mini

Smokey

You can connect any enigma2 box together (between them) if you talk about the remote tuner.

If you want multi images, with Android, it will be only on last generation of DMM boxes, that can have DMM images as well as Open images (like OpenPLi).

The Android TV is an image by itself, it's not enigma2, and will not be able to communicate to other boxes that are Enigma2, only when you run the Enigma2 image on your DreamOne/DreamTwo/DreamMini you can connect remotely to it's tuners or other enigma2 boxes tuners.

TS