DREAMBOX DM800HD MOTOR SETUP

Hi I have Gemeni image install in my box.

Here is some information how to setup your box with motorized dish (diseqc 1.2)

First Go to:

Menu--------->Setup------>service searching--->tuner configuration--->Advanced

then choose any setllite you want example we select Hotbird 13 east

Advanced---->hotbird

LNB--->1

USE USALS---->NO

Store --->001

diseqc----->1.2

-----------------------------------

Only change these setting please dont change any other setting then press ok then exit

same you can did other setllites setting but everytime you add other setllite please select LNB2 AND Store :002 and if you add more settllites pls give them LNB3....AND store :3

then go to Positioner Tuner setup

MENU--->-->Setup------>service searching-->Tuner positioner---->Tuner-- select satellite Example

Tuner positioner---->Tuner--Astra 19east

store postion---->1

then move your your dish east by pressing green button when you get astra signal and say locaked just press green button to store setting.then exit

Now search your astra 19 east by Manual scan and do the same for other setllites just Change store number 1.2.3.4.5. remember all satellites are stored with different numbers hope this method will work for you.

Hello

Thanks for instructions. I tried to use my DM800HDse using a HH motor and USALS for Ku band following steps instead of Diseqc 1.2 but it doesn't work. Are there any additional steps necessary to make the USAL work??

Regards

Check the Tone, in some motors you need to extend the Tone ns on the setup,

Admin

Ok will check and post back, Thanks!

Sorry, it didnt worked

I used all 3 options at the tone ;Off/ON/BAND but no motor movement at all
Of course I have checked option Diseqc 1.2 USALS on and entered my location latitude/Longitude

We are not talking about off/on/band, but the amplitude of the Tone (it seems to be on the DM800HDpvr, but not other boxes). Then I have no other tip.

Perhaps this could help ?

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3135

Admin

OK. Thank you very much!!