Hello frind

I have dm800se v2 original and openvision image and I install mt7601 usb wifi driver but I can not see wilan in network menu I see only lan device can you help me.

Thanks

You also have to install the Wireless plugin, as explained on the topic below, from the feeds of the image you use.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=18781#Post18781

Admin

Thanks

Hi

Isusb.log

Bus 006 Device 001: ID 1d6b:0001
Bus 005 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 001: ID 1d6b:0002
Bus 004 Device 002: ID 148f:7601
Bus 004 Device 001: ID 1d6b:0002

usb-devices.log

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.14
S: Manufacturer=Linux 3.14-1.17-dm920 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=f0471000.xhci_v2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=(none)

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 2
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=03.14
S: Manufacturer=Linux 3.14-1.17-dm920 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=f0471000.xhci_v2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.14
S: Manufacturer=Linux 3.14-1.17-dm920 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=f0470300.ehci_v2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.14
S: Manufacturer=Linux 3.14-1.17-dm920 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=f0470500.ehci_v2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=7601 Rev=00.00
S: Manufacturer=MediaTek
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=160mA
I: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)


T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.14
S: Manufacturer=Linux 3.14-1.17-dm920 ohci_hcd
S: Product=BRCM OHCI controller
S: SerialNumber=f0470400.ohci_v2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.14
S: Manufacturer=Linux 3.14-1.17-dm920 ohci_hcd
S: Product=BRCM OHCI controller
S: SerialNumber=f0470600.ohci_v2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

Wifi Adaptör TENDA W311M For dreambox 920; Which kernel should I install?

firmware i found;

http://www.dreamboxupdate.com/opendreamb...09-r0.2_all.deb

http://www.dreamboxupdate.com/opendreamb...09-r0.2_all.deb

The wifi adapter did not work with this firmware. I have to install kernel.

You Wifi Dongle is :

T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=7601 Rev=00.00
S: Manufacturer=MediaTek
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=160mA
I: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Bus 004 Device 002: ID 148f:7601

You need to find the driver for the 7601 Wifi chipset for your image from the feeds of the image. The firmware links are broken (you should copy it completely and not with the ...).

Admin

Thanks. for information

driver and firmware O.E 2.5 could not find for Dreambox 920

I need your help for driver and firmware

I Think the best for you is to use an alternative firmware, like OpenATV, etc. Perhaps the driver will be available for your 7601.

Otherwise if you still want to use OE2.5 image, then you could have to change Wifi Dongle, and find one compatible.

Admin