The "jam3.japhar" is working but the MastaG one didn't work ?
Yes i have an original box.
Why the MastaG image didn't work?

The "jam3.japhar" ? You mean this one ? VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

And the one from this topic on the http://www.japhar.com/OpenPLi/ link, better to use the V2 image (V3 could not boot depending of the hardware).

Admin

Yes I mean "jam3.japhar" VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip. Is it possible the install a Mastag and which one of original box?

Both images are from MastaG, so use the one you prefer.

This one is for Original : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

The one of this topic, as indicated is for Clone Ferrari V2-V3 (and compatible with Original Boxes).

Admin

youtube and E2iplayer don't work with all ferrari openpli; black hole
but works perfectly with Pbnigma 5.1 for vuuno
which pythons must we add in openpli .?

You need replace the Tuner, with an original one or replace the security chip with the VUJ. Drivers for v2-3 Ferrari are too old to support this. So you need more recent image/software and so, drivers.

Admin

but why all is ok with Pbnigma 5.1?
its old (2016, kernel 3.1.1) like us openpli

There is only one way, to recompile all the OpenPLi (or the image needed) with the older kernel/drivers, but that's a lot of work, and not worth the time... as there is the cheap solution of the VUJ Board/Chip, and on the Uno just replacing the clone tuner by an original one.

Admin