Cannot reflash DM800HDse V2 after wrong Image - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/

Welcome to Our Dreambox World - Japhar Sim - SuperSim

Forum Stats

12524 Members
237 Forums
7900 Topics
24302 Posts

Max Online: 9115 @ 08/24/24 07:30 PM

Newest Members

Top Posters (30 Days)

Topic Options

#23035 - 03/04/21 02:24 AM Cannot reflash DM800HDse V2 after wrong Image
diceman01 VIP Japhar newbie Registered: 06/29/14 Posts: 47 Loc: Everywhere	Hi everyone hope is all well. I found my old Sunray DM800HD se V2 and Japhar Sim and reflashed sim and Installed latest OPENATV Image and all went well. I reflashed another Image and got no CA. I wasn't worried about that thinking I could just reflash again with JapharFlasher but I keep getting the following error: Got wrong response from box:HTTP/1.0 400 Bad Request Content- Type: test/plain Cache-Control: no-cache Connection: close lcd+++SERIAL MODE+++ If I put the Sim 2 back In and download a image to suit I don't get the error but the image won't write to flash after downloading image to box. _________________________ DM800 DM800SE DM800SEV2 VU+ UNO VU+ DUO VU+ DUO2 VU+ SOLO2
Top

#23036 - 03/04/21 02:40 AM Re: Cannot reflash DM800HDse V2 after wrong Image [Re: diceman01]
Admin Japhar Member Carpal Tunnel Registered: 10/19/10 Posts: 10092	Check your PSU, use 3 Amp and perhaps remove HDD, USB, etc to give all power to Flash writting Admin _________________________
Top

#23037 - 03/04/21 02:50 AM Re: Cannot reflash DM800HDse V2 after wrong Image [Re: diceman01]
diceman01 VIP Japhar newbie Registered: 06/29/14 Posts: 47 Loc: Everywhere	I have 3 amp PSU and HDD has been removed during flash stage. Im starting to think maybe flash is corrupted inside box. _________________________ DM800 DM800SE DM800SEV2 VU+ UNO VU+ DUO VU+ DUO2 VU+ SOLO2
Top

#23038 - 03/04/21 03:14 AM Re: Cannot reflash DM800HDse V2 after wrong Image [Re: diceman01]
Admin Japhar Member Carpal Tunnel Registered: 10/19/10 Posts: 10092	Generally it's a problem of PSU, it could be old and failed. Flash is good and reliable... but needs to have full power from PSU. I would get a good PSU, even more than 3 Amp for it. Admin _________________________
Top

#23039 - 03/04/21 04:23 AM Re: Cannot reflash DM800HDse V2 after wrong Image [Re: diceman01]
diceman01 VIP Japhar newbie Registered: 06/29/14 Posts: 47 Loc: Everywhere	I just tried a 5amp PSU same issue sorry, this is a good PSU not a china clone type. _________________________ DM800 DM800SE DM800SEV2 VU+ UNO VU+ DUO VU+ DUO2 VU+ SOLO2
Top

#23040 - 03/04/21 05:45 AM Re: Cannot reflash DM800HDse V2 after wrong Image [Re: diceman01]
Emosim stranger Registered: 03/27/16 Posts: 8	Ok, try then to use the Bad Sector Recovery from the JapharFlasher or set it up with telnet. Then flash the image. http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3137 http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=5234 Emo
Top

Hop to:

New Topics

DM920UHD Wifi Adapter Internet
by bori
01/04/26 02:26 PM

Simple DVB-C receiver
by bobot
12/13/25 09:24 AM

Japhar Supersim3 NC3 for DM800HD clone
by nas272001
12/17/15 11:03 AM

(Views)Popular Topics

Satellite Tv channels Updates Eurasia	26099777
VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)	1006542
OpenPLI 4.0 IPTV, DVB-T A867 drivers (WORKING)	522703
RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi	499297
Lotus Macau TV - English movie schedule @ 105.5E	440639
SatVenus Panel	412347
Patched BarryAllen..For.. Clone Box	302682
Vu+ Solo : BlackHole IPTV v20 NC3 (Ferrari V3)	257145
DM800HDse : OpenPLi 4.0 IPTV 1300ch Japhar (v3)	243816
FAM 5.2, JAM 5.2 : Japhar/Ferr Addon Manager 5.2 !	226857