Hello, can I install on DM 800se with Japhar sim this image from the link which is for original DM 800se?
https://openpli.org/download/dreambox/DM800+SE+HD

Yes, you can but you will need to flash the SSL just after flashing the image (before reboot), and then go on the driver folder to replace the driver bcm7xxx.ko.

See : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=18338#Post18338

TS

which ssl exactly should i flash before reboot? ssl 84D or 84J? or some other ssl?

Box with Japhar Sim, only SSL84J

TS

After flashing image and afther that ssl 84J results is reciver is started but it dont want to connect to ftp and green screen ot tv display. Any ideas?

Just after flashing the image, be sure you DON'T flash again the SSL, as it's already in the image and linked to the image itself (needs that specific one to work).

TS

I tried to flash image on first post for original DM 800Se on box whit Japhar sim. When i flashing image whitout ssl 84j i recive message no ca found on the box display. When i flash image and after that ssl 84J box is started and yellow line move on the box display but on the tv display i show green screen. When i am wrong?

Flash first the SSL84J, then reboot the box. And flash finally the Japhar image (that already contains the SSL84J, so no need to flash it again after image).

Admin

after flashing i see this message

Flashing failed (!!! 005 too much data (or bad sectors) on partition 3 (end: 04000000, pos: 04000000) box will be unusabele now!!

how to fix it? I try with Japhar flasher but i see this message

Flash chips have some bad sectors (as HDDs etc).

But this one could be also related to a PSU that doesn't give enough power to the motherboard, to be able to write into the Flash chip (as 0x00000000 with all 000 means start address, and it's strange).

Admin