Welcome to Our Dreambox World - Japhar Sim - SuperSim
Forum Stats
12697 Members
237 Forums
7974 Topics
24436 Posts

Max Online: 21728 @ 10/12/26 03:49 AM
Newest Members
Yazoo309, Machintosh, NunoSa, fan22, totoy
12697 Registered Users
Who's Online
2 registered (Toysoft, Admin), 739 Guests and 64 Spiders online.
Key: Admin, Global Mod, Mod
Shout Box

Top Posters
Admin 10161
Toysoft 2739
satsedhu 1713
fairbird 765
ludo19 442
Top Posters (30 Days)
Admin 4
Smoky 1
November
M Tu W Th F Sa Su
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30
Topic Options
#25926 - 06/05/26 09:33 AM Dreambox Cooling Fan
Smoky Offline
stranger

Registered: 09/05/24
Posts: 12
Is is possible to fit one in 7020v1?

Thanks

Top
#25927 - 06/05/26 10:49 AM Re: Dreambox Cooling Fan [Re: Smoky]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 10161


Attachments
1.jpg (17 downloads)
2.jpg (17 downloads)
3.jpg (17 downloads)
4.jpg (17 downloads)

_________________________

Top
#25928 - 06/06/26 12:25 PM Re: Dreambox Cooling Fan [Re: Admin]
Smoky Offline
stranger

Registered: 09/05/24
Posts: 12
Thanks!

Top
#25995 - Today at 10:32 AM Re: Dreambox Cooling Fan [Re: Smoky]
Smoky Offline
stranger

Registered: 09/05/24
Posts: 12
Is 0.2A cooling fan safe to use for DM7020 Hd?

Thanks

Top
#25996 - Today at 02:26 PM Re: Dreambox Cooling Fan [Re: Smoky]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 10161
Yes, a 0.2A (200mA) cooling fan is safe to use in a Dreambox DM7020HD, provided it is a 12V DC fan. At 12V, a 0.2A fan only draws 2.4 Watts of power, which is well within the safe operating limits of the Dreambox's internal 12V rail (both on the dedicated motherboard fan header and on the internal SATA power rail). For comparison, standard OEM replacement fans for the DM7020HD typically draw around 0.12A, and users routinely run standard PC case/CPU fans up to 0.60A without overloading the board.

- Key Compatibility Checks Before Installing
• Voltage Rating (Crucial): Confirm the label on the fan says 12V DC. Do not connect a 5V fan directly to a 12V header, as it will burn out immediately.
• Connector Type (3-Pin vs. 4-Pin PWM):
o The DM7020HD motherboard features a standard 4-pin PWM fan header.
o If your 0.2A fan is 4-pin, you can control its speed directly via Enigma2 using the FanControl2 plugin.
o If your fan is 3-pin, it will still plug in and run safely, though speed control may be limited depending on your Enigma2 image's voltage-regulation support.
• Pinout Polarity: Double-check that the wire order on your fan's plug matches standard PC/Dreambox pinouts before powering on (Pin 1: Black/Ground, Pin 2: Yellow or Red/+12V, Pin 3: Green/Sense, Pin 4: Blue/PWM).
• Physical Clearance: Ensure the fan thickness allows the top lid to close without pressing against the heatsink or tuner modules (slim 10mm–15mm fans fit best).

- Disconnect Mains Power First
Always unplug the Dreambox power cord completely from the wall outlet before opening the casing or connecting wires to the motherboard header.


Originally Posted By: Smoky
Is 0.2A cooling fan safe to use for DM7020HD ?
Thanks
_________________________

Top


Moderator:  Toysoft 
New Topics
SpaceX set to splash $74B on pair of US facilities
by Admin
11/13/26 03:24 PM
DM52x : Reflash the Rescue Bootloader from Rescue
by Admin
11/05/26 11:21 AM
SpaceX in talks to buy Boost Mobile, network asset
by Admin
11/03/26 03:19 PM
Dreambox Cooling Fan
by Smoky
06/05/26 09:33 AM