Yeah okay, but the most important question is, are you be able to execute/finish these instructions.

So, if I understand correctly.
1. You are be able to make a connection with SunRay-FlashUp.
2. You have the Use network enabled.
3. When the flash button activate, you see the Status message, Box is in networked HTTP mode.
4. And you are be able to make a network connection to the box with your browser.
5. And you are be able to upload the image file trough the browser, and afterwards the boot loader.

But.. you still get the No Ca Found issue?
If so, Than you may have a hardware failure with your box.


_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

Click on the banner if you like to go there..