This image :SuperSim_DE-OpenBlackHole_1.4_Japhar-Ferrari_dm800HDse_SSL84J_Jan2k15 on my 800hd pwr supersim nc3 respond image wrong for this architecture !!!!!!!!!!!!!!!

Yes, this is normal, did you read the topic about using SSL84x ? Which SSL / Image did you had previously on the DM800HDse box ? Do you have a DM800HDse or a DM800HD ?

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2424

TS

Can you recommended a image for my box that does not have problems with avermedia 867 blue sky and on which it can find all the things i need , in the final instance put nemesis .

Hello Balocco,

To the informations I have, your sim is a DM800HD Japhar Sim, and naturally any other image (eg. DM800HDse will show that error if your box is a DM800HD, as both are completely different hardware).

So if you have as I believe a DM800HD box with a SuperSim3 Japhar NC3, the best to use is the OpenPli 4.0 IPTV, where you can install with only few commands the A867 DigitalKey.

Image OpenPLi 4.0 Download here : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2294#Post2294

A867 Installation, see the 4 commands explained on the topic : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3377#Post3377

That are (to be sent connected in SSH or Telnet to the box) :


Then you should have the best of what you want, including IPTV.

TS

P.S.: You can also install the DE-OpenBlackHole 1.4 that will automatically detect your A867 DVB-T dongle and install it, with no further need of configurations. But my image doesn't support IPTV.

Link : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=371#Post371

Good morning, yes toysoft you're right , actually , I did sleep and i flash wrong image. :-) , but with openpli i do not operate with a cam , i need to install o+++m svr<10005 then individuate the file o+++m.log for my script that access to it. in black hole the pack cam o+++9533-c+++213 is blocked and i do now how can operate on it. i need o+++m only. Now I'm considering between Openpli O.e 2.0(iptv at top), blackhole(very good for stability) but o.e 1.6 , nemesis 112r3 (story and I know it better the first two)..

If you check properly on the JAM 5.2 section CAM OpenPLi, you will find there all what you need. Perhaps better to go to sleep again ;o), and then you can install properly the full OpenPLi 4.0 IPTV with the Cam you wish (As wrote, you need to install OE2.0 or ALL OE only plugins/Cams/ipk/packs).

Admin

my key a867 blue did not want to light up in any way, either via telnet through japhar plugin manager(jam 5.2)give me an error message at avermediaA867B800hd install . Instead I have to say that IPTV is fast and fluid.
I'll try tonight

ps do you do , after many image flash can broke the nc3?

No, you cannot break the NC3 Sim.

Concerning the A867, give me more details as 100% sure it works on the DE-OpenBlackHole 1.4 that I built (!) so I know how it works ;o), as well as on OpenPli 4.0 IPTV of MastaG (but you need to install thru the command lines, and reboot the box to see it).

When you boot the box the A867 MUST be inserted, you cannot insert it "after" boot.

TS