12626 Members
237 Forums
7939 Topics
24384 Posts
Max Online: 15217 @ 04/11/26 09:25 PM
|
|
|
|
2 registered (Toysoft, Admin),
3187
Guests and
55
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
|
29
|
30
|
|
|
|
|
|
|
|
|
#5805 - 02/17/16 08:31 PM
DM8000HD Flat Ribbon Front Panel (Johnny ?)
|
VIP Japhar
journeyman
Registered: 03/21/15
Posts: 45
|
The 14-pin flat ribbon cable that has the decoder to display the first red stripe refers as No. 1 for the connector ?
Thanks for the reply
|
|
Top
|
|
|
|
|
|
#5808 - 02/18/16 01:48 AM
Re: DM8000HD Flat Ribbon Front Panel (Johnny ?)
[Re: any]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
The ribbon cable from the front panel is not really a good reference on the red wire.
If the ribbon cable is connected differently on the front panel, the motherboard side will than also be different.
But it should have to give no damage when it's connected wrong, because the 14v pin comes at both sides on a pin which is not connected, and thus the front panel is not powered.
But it is of course better to avoid it, take a note, or picture from it before you remove it.
Because with every box, it depends how it is connected to the front panel, as you can see on this two pictures.
Attachments
dm8000hd-fp-cablesnap.jpg (43 downloads)dm8000hd-fp-cablesnap2.jpg (38 downloads)
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there.. 
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index
