It is posiblle to connect two 800HD to control one usals motor?

And to get what? Not possible, one has to be always off.

Probably you can connect one to the usals motor, as the master, and the second will stay slave (having like a Dual LNB, the second cable going to the slave box when the first master box will tell to the Motor where to be).

Admin

I thought so,reading forums on the net i bumped into discusion about "smart diseqc switch" how is "capabile" to switch control of motor between two reciver's, and i just wanted your opinion.Thanks!

We don't know a "smart diseqc switch" for usals that would allow 2 boxes to work together, perhaps you have to ask there and post here what they tell, as we all learn every day ;o)

TS

***Splitter with smart operation.
There are splitter - switches that enable the last input that a voltage was changed on them.
So if you turn off dm800 and its on input B then the power will pass only from that one.***

Good, thank you, so yes definitely only 1 can work at a time, and the other one must be off or not active. Hopefully you must not remove the cable ;o), and all is "automatic", but be sure nobody in the family turn on the other one while you use the first box.

Admin

This confirms gaga24 story , always one off!!!

Thanks a lot people, if I come up with somthing smarter,I will ask you for opinion.