12561 Members
237 Forums
7902 Topics
24311 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
2 registered (Admin, Toysoft),
467
Guests and
64
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
31
|
|
|
|
|
|
|
|
|
|
|
|
DM7020HD (v1/v2)
|
|
When loading software into a receiver, it's not the intention that we have to add much ourselves to get the device to boot. So I won't go any further in the BIOS or make any other additions. Now, with this 12.3 software, my receiver works fine.
|
|
DM7020HD (v1/v2)
|
|
I use the openpli 8.x version on my DM7020HDv1, don't have with me the DM7020HDv2 to test... but I did compile it and it was ok when I released the 8.x. Try to reset also the BIOS of the box, via Telnet... just in case something is wrongly configure
|
|
DM7020HD (v1/v2)
|
|
I'm loading the original software into the Dreambox release-dm7020hdv2-4.1.0, which works fine. Now I'm going to turn off the receiver. Then put it in a stopmos and load your software. OpenPLi 9.x: http://openpli9xstar.japhar.net/OpenPLi9xstar/ The s
|
|
DM7020HD (v1/v2)
|
|
Flash a Dreambox DMM image (DreamOS), then boot it. This done, then flash the OpenPli DM7020HD v2 image, it should have updated the box properly (drivers, microcode, FPGA...). Link : - OpenPLi 8.x : http://openpli8xstar.japhar.net/OpenPLi8xstar/ -
|
|
DM7020HD (v1/v2)
|
|
I loaded this software into the Dreambox 7020hd v2, but now it only boots up a bit. Secondstage 89 also appears on the LCD screen. Then it goes back to booting, Dreambox...DHCP, etc. After a few minutes, the device shuts down and then restarts with t
|
|
|
|
|
