DM800HDse : OpenPLi 5.0 IPTV Daily by Japhar NC3 OE2.x Kernel3.2 (Needs BetaV4 OS)



MEGA : https://mega.nz/#!g2hCmLQZ!7mYrC3ypW6fgetriNVRZta2IhBjkzCnjrFr76qejiUo

Admin

When installing tripletuner from JAM it says "incompatible with this kernel version 3.2" ( i have NC3 Beta V4 ), did i miss something?

You have to install the version for Kernel 3.2,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9540#Post9540

What is your VIP number, as I don't find you on our Sim owners List.

TS

P.S.: Try this one attached and let me know if it works.

It's xxxx, received the card today. I installed that version and restarted but i still have only dvb-s2 showing, maybe because my DM800 clone is not V2?

Try to install the one I just built above, and reboot box and let me know if it works, that file above should be now also on the JAM under the OpenPLi 4.0 section (File named for Triple Tuner for OpenPLi 5.0).

TS

Unfortunately not. I'll reflash the image and start from scatch.

In case it could be useful, when installing from telnet i get this:

Tripletuner Installed
Homepage: http://www.japhar.com Checking for an older version of Tripletuner driver in the system...
Tripletuner was not found in the system
Proceeding to installation...
Configuring tripletuner.
Post installation checking module..
/lib/modules/3.2-dm800se/extra/nim_sockets.ko
File found.. perfect!!

/lib/modules/3.2-dm800se/extra/trialtunerdriver.ko
File found.. perfect!!

Reboot the system in 5 sec.

Broadcast message from root@dm800se (pts/0) (Thu Jan 1 01:05:44 1970):

The system is going down for reboot NOW!
Collected errors:
* parse_from_stream_nomalloc: Missing new line character at end of file!
root@dm800se:~#
*** Server has closed ***

I replaced the driver ipk on my post above as well as updated the one on the JAM, now it should install.

TS

My post above : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=12583#Post12583

It installs perfectly, but it doesn't find any DVB-T channels, i'll check if it's my fault on something.

Update the terrestrial.xml file, most probably there is something needed, as the current file is only 25kb.

TS

P.S.: If it still doesn't work, in the "extra" folder with my previous drivers, you can replace the 2 files by the ones in the rar and let me know if it works... but it should be the same as the previous ones.

I have read this about OpenPLi and the Triple/Trial Tuner,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9539#Post9539

Admin

I give up, cannot get it to work, i'll try with a different image, thanks for you help!

Hello ,

Is this image compatible for the DM8000HD please ??

For now we built it only for DM800HDse with Japhar Sim,

Admin

Just to say that i reinstalled the image and the driver in post #12583, and the triple tuner is working correctly, don't know why it didn't before. Thanks again Toysoft.

Excellent, THANK YOU for updating us, this is nice and will help many other members,

Merci !

Admin

pas d'openpli 6 pour les vu+ Ferrari ?

Possible, mais c'est beaucoup de travail, et la v6 n'est qu'en essai, etc, donc peut etre mais pas immediatement.

La OpenPLi 4.0 est en fait une 5.0+ avancee et en realite deja bien mieux que la 6.0...

Admin