Posted by: Admin
Triple Tuner for DM800HDseV2 DVB-S2, DVB-T, DVB-C - 08/18/17 11:02 PM
Triple Tuner for DM800HDseV2 - DVB-S2, DVB-T, DVB-C for OpenPLi 4.0+/5.0+/6.0+ by Japhar
For OpenPLi 4.0+/5.0+/6.0+ IPTV Japhar Team / MastaG
You can also install it directly from the JAM 5.2 from "Plugin OE2.0" section.
Download Link : OpenPLi 4.0+/5.0+/6.0+ IPTV Built-in Image Triple/Trial Tuner DM800HDseV2
How To ?
- Download the ipk above
- FTP/WinSCP it to the /tmp folder of your box
- Launch install with command :
"opkg install tripletuner_2.0b-OpenPLi-5.0-Japhar-dm800sev2_all.ipk"
- Then reboot the box
- The Triple Tuner will then appear in your Tuner list.
For OpenPLi 4.0+/5.0+/6.0+ IPTV Japhar Team / MastaG
You can also install it directly from the JAM 5.2 from "Plugin OE2.0" section.
Code:
It causes lockups and freezes because Enigma2 is trying to get signal on all ports at the same time. Also qam256 transponders do not work. It's best to remove the plugin and configure the tuner in advanced mode. Then just use lnb 0 for cable , lnb 1 for dvbt, and lnb 2 and rest for all satellites. For example for cable, set an unused satellite to lnb 0 and set "universal lnb" to manual and fill in 00000 for all 3 values (lof etc). Disable diseqc and tone mode, then save. Then choose manual scan and select transponder for scan type. Inversion on = cable , off = dvbt (or vice versa I forgot :p) Just scan all cable frequencies one by one by putting a 1 in front of the frequency. For example 344MHz should be 1334. Transponder type should be dvbs not dvbs2.
Download Link : OpenPLi 4.0+/5.0+/6.0+ IPTV Built-in Image Triple/Trial Tuner DM800HDseV2
How To ?
- Download the ipk above
- FTP/WinSCP it to the /tmp folder of your box
- Launch install with command :
"opkg install tripletuner_2.0b-OpenPLi-5.0-Japhar-dm800sev2_all.ipk"
- Then reboot the box
- The Triple Tuner will then appear in your Tuner list.