Image for DM900UHD original

I have a Dreambox DM900UHD original that she is the best image for it.

Thank you for your help

All images for your box are available here,

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=192&page=1

but I would select the latest OpenPLi that should be the best for you,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=19467#Post19467

Admin

hello

Thank you for your answer
but she does not want to settle
here is the installation report

[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Creating ext4 filesystem 'dreambox-rootfs' on /dev/mmcblk0p2
mke2fs 1.43-WIP (18-May-2015)
Discarding device blocks: 4096/253952 done
Creating filesystem with 253952 4k blocks and 63488 inodes
Filesystem UUID: 322aee37-5b77-4e70-b205-f3ff2c8431f0
Superblock backups stored on blocks:
32768, 98304, 163840, 229376

Allocating group tables: 0/8 done
Writing inode tables: 0/8 done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: 0/8 done

[*] Mounting '/dev/mmcblk0p2' to '/mnt'
[*] Extracting '/tmp/2RixgK' to '/mnt'
[*] Mounting '/dev' to '/mnt/dev'
[*] Mounting '/proc' to '/mnt/proc'
[*] Mounting '/run' to '/mnt/run'
[*] Mounting '/sys' to '/mnt/sys'
[*] Mounting '/tmp' to '/mnt/tmp'
Warning: Could not read CA!
Warning: Please consider updating your rescue loader!
/usr/sbin/flash-kernel: line 100: stat: not found
sh: bad number
Fatal: Kernel image is too big
Fatal: Failed to run kernel-image.postinst
[*] Unmounting '/mnt/tmp'
[*] Unmounting '/mnt/sys'
[*] Unmounting '/mnt/run'
[*] Unmounting '/mnt/proc'
[*] Unmounting '/mnt/dev'
[*] Unmounting '/mnt'

This is correct log, check the box and boot it, you will see that the image properly loaded and works. Check on the image information GUI/Menu that the image is now the one you flashed (date of compilation).

Admin

thank you for your reply
it starts I see the page openpli
and she passes green image
we are sorry ....
your STB restarts in 10 seconds
but go no further

Reflash, image works. Naturally remember that Japhar images (for Japhar sim or Original boxes) MUST be installed into Flash and not multiboot or external Flash...

Admin

re
version 7.1 installs well
but the 7.2 she does not want
and I install it on the flash

Please post the error log, so we can look at the error you got in the log file.

Admin

it tells me that it writes a message but when I in the folder there is nothing
media / hdd /

I found them
or then I sent the two files

Pack files in RAR or Zip and attach to post here.

Admin

Logs

I have problems with OpenLPi 7.1 and 7.2. My DM900uhd is stopping after a few hours (freezzing). Am very sorry for this, because in all other ways I like it very much. But I had to go back and reinstall OpenATV 6.2 wich is stable.

Waiting for a stable OpenPLi 7.2 for DM900uhd

The image is stable and we have no such problem, we are 3 of the Team using it with DM900UHD.

Admin

OK, thanks. Then I have to try it again. Have to start with so slimmed as possible.
---------

Ok now I have had Openpli 7star 2019-12-20 running. Has worked fine a couple of hours. It should work with updating, but I had the feeling that after updating there has been box lockings. I will try and make updating tomorrew evening, and see what happens.

Sure, if you can report exactly where it happens and which part of the software is the reason of your freezes it could be handy.

We use 2 x DM900UHD Clone upgraded to Japhar, and 1 x DM900UHD Original.

Thanks !

Admin

I did a new installation and had a few stops, freezings. After making a completly new installation without using any reinstalling of system installations, my box works fine 24H during at least 3 days. Has never happened before. I have the latest update 2020-01-21. Tripple tuner (4 sat positions, C/T and IPTV).

Very happy that all seems to be OK, perhaps some issues of Flash having some "mind problems". Yes, sometimes also the "problem" comes from some configuration/settings moved from the old to the new install... I would bet on this.

Please update us if any news comes,

That's the version we all use, having upgraded to it via the feeds.

Admin

Working very fine on my DM900uhd. But I also have a DM7080HD and I can not find any OpenPLi for it. Do you have any?

For DM7080HD you have this one,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=19148#Post19148

Admin

Bonjour

Je reviens mon probleme initial
impossible de flasher via reseau pour mettre une openpli
image trop grande

meme avec l'original

Les images Open n'ont pas le meme format que les DMM, et donc le script de check mets ces warning, de maniere erronee.

Flashez l'image OpenPLi 7.2star sur votre DM900UHD et juste bootez ensuite, vous verrez que tout fonctionne parfaitement.

Admin

P.S.: Dans le cas du DM800HDpvr (et autres DM800HDse/DM500HD/DM8000HD), il faut flasher le SSL84 tout seul, puis rebooter, et flasher la nouvelle image. Les images avec SSL84 ne peuvent pas etre fashees avec un boot inferieur au 84, donc il faut flasher le boot seul, puis rebooter et flasher l'image. Important, vous risquez, pour pouvoir faire cela aussi, d'etre oblige a utiliser un vieux naviateur comme Firefox 3.6.

merci de la reponse