DM800HDseV2 Daily : OpenBlackHole 4.0+ IPTV (v5)

OpenBlackHole 4.0+ IPTV Daily Build (v5)



- Supported built in Wifi on DM800HDse boxes
- Stable OpenPLi base to build OpenBlackHole
- Supports AC3+/DDP/DD+
- Feeds online (For Wifi/DVB-T Dongles)
- Triple/Trial Tuner supported
- DVB-T Dongles, install from JAM, Hauppauge, A867, etc
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV+ Better Support
- Built-in 1300 FTA IPTV Channels Free
- JAM 5.3 built-in (Plugins/Addons)
- Support by Japhar Team

MEGA : https://mega.nz/#!hjxxjLoS!vez-tBNWuHil1uiJDunh3c7AH85GWLgCRmvivl10aHc

Daily Link (Most up to date) : http://www.japhar.com/OpenBH/

DM 800se v2 Wifi 8192cu appear in network section but don't work in any configuration (DHCP or manual config). Only lan is working!

Which one you tried ? The MEGA link that was published the 07/22/17 or as indicated... the "Daily Link (Most up to date) : Daily Link Download" ? As for me, it works.

Admin

Daily Link Download

Wifi Works,

Admin

In OpenBlackHole 4.0+ IPTV (v5) IS PRESENT in setup/network but do not work ! Only lan is working in 800SE V2 !
I've tried all the posible configuration!

Same here, PERFECTLY WORKING, connected and watching via Wifi FTA IPTV Channel.

Admin

For me don't work !Only in Open Esi 5.0 is fully functional wifi! Verry odd !

You need to install the drivers,... if you didn't, then it's normal that it doesn't work. As I told you, send the lsusb and lsmod commands and post here the results.

Did you sent the commands below as explained to you on a long topic you open with many many posts and tips to help you ? (Perhaps you forgot about it ?)

opkg install
opkg install kernel-module-8192cu

Topic : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=13485#Post13485

Admin