Dongle Wi-Fi

Hello to all guys, I'm having a problem that I just can not solve in practice I inet800 HD and if I wanted to install a Wi-Fi USB key as they are unable to connect to the LAN. But going in network setting me appears only the LAN menu does not give me a choice whether or wlan connect in LAN! Can you help me? Thank you

The drivers for Wifi, DVB-T, etc are linked to the image, so you can only install the drivers built for the image. The image installed needs to have available the drivers. You cannot install drivers from other origins. If you do, it will not work.

So in such cases, you need to know which image you have installed, which SSL/Sim, and which dongle (PID/VID) you want installed.

Admin

hello and thank you for the answer.
then the decoder and installed an image dreamelite 4.0 sim is a Ferrari green and the Wi-Fi support has rt 5370 chip.
if you kindly show me how to proceed, if I have to change image, or how to install the drivers.
thanks for everything

I don't find any RT5370 driver for the image you talk about. If the image doesn't recognize it properly then probably you have only left the solutions to use a better supported image, such as the OpenPli 4.0 IPTV but would need to upgrade the sim to the Japhar NC3.

The OpenPLi 4.0 IPTV recognizes automatically the RT5370 Wifi Dongle, but you need a NC3 Japhar Sim.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1940#Post1940

TS

ok thanks as I can do to upgrade the sim?

You need to get the Japhar NC3 sim, once you receive it you will have to proceed as per the Tutorial, replacing the SSL, then the sim when the box is off, then flashing the OpenPLi 4.0 IPTV.

Tutorial Italiano : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=5139#Post5139

Hai PM con piu infos,

Admin

ok possibly if I wanted to leave this sim there a wifi stick that I can buy, and that is correctly recognized?

It depends of the image, every image support some specific Wifi Dongle such as the very old RT3070 or RT2870, but both impossible to find today, as replaced by the RT5370 and now the MT7602.

You can try all images on the Ferrari section, until one works with your Wifi Dongle.

See Ferrari images : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=65&page=1

If you don't find anything, then you will have, if you want to use your dongle, to upgrade your box to a newer Sim to use newer images such as the OpenPli 4.0 that gives you also the IPTV compatibility for example, etc and much much more, like speed etc. It's really worth upgrading. Try the Ferrari images, only the ones built-in with drivers could work, if your Wifi Dongle is supported.

Admin

ok, then I think to change sim. I confirm for me that for my inet800hdse okay sim Jhapar NC3? thank you

Yes, confirmed 100%. INET was based on Ferrari hardware, and Japhar is Ferrari compatible.

TS

besides buying the NC3 Japhar DM800se I also have to change the socket sim?

Generally this is only necessary on some DM800HD boxes, where the sim was glued. But most of boxes doesn't need it.

Admin

hi, i installed the japhar sim that I just arrived and I installed ssl 84 onepli 4.0, now I wanted to know how to collegari box in wifi, in the network settings I found only ethernet thanks a lot

Good, perfect.

Read this, on the Drivers section (DVB-T),

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=10030#Post10030

Admin

thanks for the answer, I settled for the digital key. now in order to connect the decoder in wifi how do I proceed? in the settings only to me the possibility to connect via lan! thank you so much

It should be recognized automatically if it's a standard Wifi Dongle,

What is the PID:VID of it ?

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=118&page=1

Admin

ok thanks, I'll try tonight, I wanted to ask another info, I loaded my personal IPTV list, the list is loaded and I find in the bouquet, but I do not part the channel vision? you tell me why? you could say also user and pass for access to telnet? thank you so much for your help.

Ok, if it's not automatically recognized we would need the VID:PID of the Wifi module/dongle to find out which chipset it is and if it needs to be installed via the feeds. Most commons are auto-installed at boot.

Concerning your second question, it's probably due to the format of the file, you need to take a look at it and be sure it's properly formatted. You can use tools such as Enigma-TV IPTV Generator to manage such type of lists, or DreamSet, DreamEdit, etc.

Enigma-TV IPTV Generator :
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3478#Post3478

Admin

you could say also user and pass for access to telnet? thank you so much for your help

Default for our OpenPli images are "root" and no password (Enter/Return).

Admin