Sunraybox DM800HDse (To Japhar)

Hello

I had a working box (sunray 800hdse. on sim write sim 2.10 800se). I want go to satellite and IPTV.

After uploading a image with IPTV the box gives me
R01: no ca found. I looked on the internet the only nfi file that he accept is ssl84d.nfi(2013) after that i can not find a good image with IPTV.

I tryed som versions of this side they do not work.
nothing work. What I have for options for this problem ?
Can someone advice me please i whant very much om my box
satelite and IPTV ?

Sim2 stopped support 2 years ago, and that team is dead.

Upgrade to Japhar sim at http://www.japhar.com/japhar/

Admin

thanks for the answer.

witch is the best for my box de V1 or the V2 NC3 japhar ?

Check below of the box the serial number,if you have no indication its v1, if its v2 it will be written and sim sim2 for v2 is 2.20. For v1 its 2.10.

Admin

hello,

Under the box is no writen V1 or V2.
on the sim is writen SIM2.10 800SE.
you write sim2.10 is V1 is this coorect. then i can order
the V1.

Yes, I confirm it's DM800HDse V1, and I seen your order so all is good and confirmed in our side.

Thank you for the support to the Forum and to the Team,

Admin

thanks for the information.
1. when i get the sim it's only change en upload an immage.
or is it not so simple. No, please is there an instruction ?
i can upload without the program. i have buttons on the box for install.
2. witch ssl is on the sim. i whant a copy incase of.

thanks for the cooperation .

This is the tutorial, if you do exactly as described you are sure to be 100% successful on the upgrade.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=11286#Post11286

Admin

hello,

today comes the sim cards.
super good that is works now.
now it's working. i order a triple tuner. can i when i have
installed the tuner put only the image with the triple tuner.
or i must use an other sim and instal the sim ?
very much thanks for the support now is my wife happy again.

Here you have all Drivers for DVB-T,

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=117&page=1

Admin

Hello,

I have a problem with the software now.
I give a factory reset. Andi can now not install My tuner. I have twin lmb.
Now i can not put hotbird intro a and Astra to b.
This option I do not have. I tryed openpli version 5 and 6.
Both I can not instal a and b. What for options I have left ?

Be sure you have the satellites.xml file in the image, as all these images are working no problem.

Flash again the clean image, be sure you have enough Flash Space and all Bad Sectors have been cleaned to have enough Flash space for the complete image.

As if you have such problems it looks like more like if the image was corrupted.

TS

hello,

the image's a download it from the side here. i think it's inclusief ?
i looked bij a frend but i can not find it.
can you plese say where and witch directory it stans ?
may be i can copy it from a other box. or is this not good
en will not work.

Sorry we don't understand what you tell,

Admin

hello,

sorry for my englisch.
i"am not zo good in englisch.
after re-flash with openlpi version 4 or 5 he kan not
install the tuner of the box.
when i log in om ip nr. 192.168.xxx.xxx then go for option
box info. the info of the tuner is as next:
tuner A empty
tuner B empty.
he do not recognize the tuner. i do not now why.
I thought let me pik an other image.
I grabbed the version of Blackhole for VU+.
this version reconize the tuner.
why not in openpli. it's for me unknown.
now it's working again. this is for me important

i hope you understand my problem now /

You need to install a version that is "+", as older drivers from the normal versions are not perfect. The new images with "+" are much better.

So you need to install the OpenPLi 4.0+, OpenPLi 5.0+, OpenPli 6.0+, or OpenPli 6.0++, or the DE-OpenBlackHole 1.5+, or OpenBlackHole 4.0+ etc.

or any other image, but the version of these images above that have no "+", will have some issues time to time with drivers (will need to reboot and it will work), so we improved them with the release of the "+" version (and new drivers).

Admin