Problem with japhar sim card 2nd failed

Hello all. The receiver is Dm 800 Hdse Ferrari sim. I bought a new Japhar sim. First I uploaded ssl 84 all sim to the receiver, then I turned off the receiver and changed the card. The receiver starts on the display or after a second failed. I'm trying to upload the new image with japhar flasher and the process is successful. Finally I wrote box was flashed successfuly. After that, however, the second failed appears on the display. Please advice where am I wrong?

If you had "2nd Failed" already with the ALLSIM SSL, it means the sim card is not properly inserted on the sim card support on the motherboard.

Admin

I think the SIM card is inserted correctly

The strange thing is that when I returned my old Ferrari with the old ssl 87F SIM card and the receiver worked normally.

I use the japhar flasher and first I upload ssl all sim then I upload the image file but at the end the display always shows 2nd Failed

I wonder where I'm wrong.....

Ok, then with the Ferrari sim and image, flash the Japhar sim from the frontpanel for DM800HDseV1 (v6) (insert the Japhar Sim on the Frontpanel as a TV Card), this using the "Frontpanel flash" on the Japhar Sim Support on the Japhar Addon Manaager (JAM). Choose the correct box, so DM800HDse V6. If the JAM is not installed on your Ferrari image, install it (see below link).

JAM : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1366#Post1366

Which box is the sim programmed for ? Can you check on the page that was included with the Sim. It should tell you exactly which one it is for. If you have an error, it seems that the Sim is not programmed or not correctly inserted. Perhaps it could be programmed for another box. So this check is important.

Or do you have a USB Sim/Smartcard programmer/reader ? If yes, try to test the Japhar sim with the DM_Sims software (that you can download here).

DM_Sims : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=50#Post50

Admin

thanks very much for help
I dont have USB Sim/Smartcard programmer/reader
I will try to reprogram it through the front panel where it is placed tv card!
where exactly to find "Frontpanel flash" on the Japhar Sim Support
which option in Japhar addons manager?

See screenshots below.

Admin

Thanks!
Job done! sim card is programated! box work again!

Good, well done !