DM8000HD PVR - ERROR1 CA NOT FOUND

Dear,

I have Japhar Sim NC3 in the DM8000
After flashing to V6 have I next error
Error 1 NO CA FOUND

I did a reflashing with the 2nd stage but stil the error
Win10 - usb Serial Null Modem Cable
JapherFlasher , see the attachted file

Rgds,
Kurt

Hello,

Can you give us your VIP number, so we can check which sim was sent to you.

Then before installing the Japhar sim you will need to flash with the older sim the new Japhar Image you find on link below. This done, you turn off the box and replace the sim inside (below of HDD).

DM8000HD Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=52&page=1

It should work immediately, if you have the sim properly installed and properly initialized for your box. So we need to know which sim you ordered thanks to your VIP Number to check this.

TS

Dear ,
I bought this DM8000 2ND Hand a week ago , I don't have a VIP nummer, but I open the DM8000 and remove the HDD I saw the Japhar Sim NC3

I don't hava another Sim, Only the JAPAHAR SIM
This Sim was already installed .

Its a 2nd Hand DM8000

Ok, then flash the image with JapharFasher (as you done above on your screenshots), I think you are using a RS232 cable (you need a PC with real RS232 port), and RJ45 connected to Router/Modem.

You will have to flash the SSL84J, and then reboot the box and flash normaly an image from link below.

SSL84J DM8000HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=365

Images Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=52&page=1

JapharFlasher : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2012

TS

So, I have next result after flashing with "Second stage DM8000 84 allsims

But still not Ok , see my attachments, DM doesn't boot 100%

Rgds,
Kurt

See attachment

Good news, you have mostly fixed the problem. There is no more NO CA ERROR, that is the first step.

Next step is to install the OpenPLi image WITHOUT flashing after the ALLSIM or SSL84J. So just flash the image alone and reboot.

If you have no Video during boot (the openpli blue background and flour), then it means the Sim is still at v3-v5 and not v6.

But please just flash the Japhar Openpli image and reboot and let us know what happens.

Admin

Dear,

How can I install the OpenPli Image whithout flashing?

Br,
Kurt

Without flashing the ALLSIM or SSL84J after, just flash the image.

Admin

If I don't flashing the ALLSIM or SSL84J then I have still the error CA NOT Found.

Flashing the ALLSIM and reboot then I don't have the Error CA NOT Found, but DM doesn't boot up completly.

Do I need to push the power on button in the front before starting up the DM to get in the serial mode, and then making connecting via the IP address?

Sorry for the stuppid questions hi

rgds,
Kurt

Ok, then are you sure the sim is a Japhar Sim ?

1) Confirm it's a japhar control visually that it is exactly as below,



2) If its a Japhar Sim you will have to do this

- Install the image below without rebooting, and flash the ALLSIM just after. Then only after reboot.
Image : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=18356
ALLSIM : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=292

- Install the JAM (if it's not on the plugin menu)


- Go on the JAM Menu ("Support Japhar Sim v3-v5-v6") and launch the "Japhar Sim Card Flashing DM800HD v6 (0)" on the menu, it will take few minutes and reboot few times.

Once the image reboot and goes to the GUI/Menu, the process should be finished.

You will then have to flash the Japhar image OpenPLi 7.3star, and all should work.

TS

Dear,
See the picture its an Orginal Japhar Sim

Rgds,
Kurt

We can confirm, the sim is a Japhar,

So proceed with point 2,

Admin

Dear,

Problem Solved

Next step is the upgrade to V6

Br,
Kurt

Yes, upgrade the sim to v6, if you had no boot logo OpenPLi flashing the Japhar OpenPLi 7.3star image as is.

Then you will get the sim updated and that will work with the DM8000HD Japhar Driver.

TS

How can I upgrade to V6 please ?

Br,
Kurt

You already have the JAM, so no need to reinstall it... next step as explained above and copied below,

- Go on the JAM Menu ("Support Japhar Sim v3-v5-v6") and launch the "Japhar Sim Card Flashing DM800HD v6 (0)" on the menu, it will take few minutes and reboot few times.

Admin

Hmm, still no succes with V6.

I Launched the "Japhar Sim card flashing DM8000HD V6(0), no errors

Then I installed next file " see attachment " via Dream Explorer plugin, no errors

But now doesn't boot the DM8000, he is hanging, see attachment

br,
Kurt

Why do you try to install an image for DreamTwo on a DM8000HD ?



The image to install is as indicated, on link below, it's a NFI file (stored on a RAR archive file).
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=22043#Post22043

Only images from section below can be installed on DM8000HD with Japhar Sim
http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=52&page=1

Admin

So far so good.

Openvision is working, next step install openpli

Rgds,
Kurt

Well done ! Congratulations,

Admin

Openpli 7.3 Sept 2020 V6 installed

Tnx for all the tips and info that I received to finish this job

Br,
Kurt

Well done ! And you can update online the image to November version,

Have a nice evening,

TS