VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3)

Posted by: Toysoft

VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 04/20/17 12:02 AM

OpenPLi 4.0 IPTV Daily Build



Available at : http://www.japhar.com/OpenPLi/
Posted by: madany

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 03/04/18 10:04 AM

thanksmmmmmmmmmmmmmmmmmmmmm
Posted by: qazannova

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 03:33 PM

Does this work on Vu+ Uno original?
Posted by: Admin

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 03:41 PM

Yes, Ferrari clone images work on original hardware.

Admin

Originally Posted By: qazannova
Does this work on Vu+ Uno original?
Posted by: qazannova

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 05:10 PM

Thank you, I just subscribed to an IPTV subscription and what do you suggest to me as the best image in IPTV (new image or backup with softcam)
Posted by: Toysoft

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 05:11 PM

OpenPLi 4.0 IPTV by MastaG/Japhar are working excellent on VU+ (you also have a MastaG "original box version"), see link below,

All MastaG Images : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9944#Post9944

Original for your box : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

And all the Japhar images (OpenPLi 5.0 IPTV, OpenPLi 6+, OpenPLi 6++, OpenPLi 6*, OpenPLi 7*, NonSoloSat 10.1).

TS
Posted by: qazannova

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 05:30 PM

Thank you where the links for all the Japhar images (OpenPLi 5.0 IPTV, OpenPLi 6+, OpenPLi 6++, OpenPLi 6*, OpenPLi 7*, NonSoloSat 10.1).

And All those images are for original ? This one is also for original boxes.

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9944#Post9944
Posted by: Admin

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 05:40 PM

These images (OpenPLi 5.0 IPTV, OpenPLi 6+, OpenPLi 6++, OpenPLi 6*, OpenPLi 7*, NonSoloSat 10.1) are for DM boxes with Japhar sim,

For VU+ you have the link you indicated, with direct link for your Original box : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

Admin
Posted by: qazannova

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 06:14 PM

MastaG the Matag don't work for me?? when the install finish it's blocked on restarting on the box & on the TV it's blocked on starting image??
Posted by: Admin

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 06:28 PM

If this one doesn't work,

VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

Then use the one of this topic,

Are you sure your box is original ? Or is a Ferrari Clone ?

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1660#Post1660

Admin
Posted by: qazannova

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 06:42 PM

Originally Posted By: Admin
If this one doesn't work,

VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

Then use the one of this topic,

Are you sure your box is original ? Or is a Ferrari Clone ?

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1660#Post1660

Admin


The "jam3.japhar" is working but the MastaG one didn't work ?
Yes i have an original box.
Why the MastaG image didn't work?
Posted by: Admin

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 06:58 PM

The "jam3.japhar" ? You mean this one ? VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

And the one from this topic on the http://www.japhar.com/OpenPLi/ link, better to use the V2 image (V3 could not boot depending of the hardware).

Admin
Posted by: qazannova

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 07:04 PM

Originally Posted By: Admin
The "jam3.japhar" ? You mean this one ? VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

And the one from this topic on the http://www.japhar.com/OpenPLi/ link, better to use the V2 image (V3 could not boot depending of the hardware).

Admin


Yes I mean "jam3.japhar" VuUno : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip. Is it possible the install a Mastag and which one of original box?

Posted by: Admin

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 01/01/19 07:28 PM

Both images are from MastaG, so use the one you prefer.

This one is for Original : http://jam3.japhar.com/images/pli/openpli-enigma2-4-vuuno_usb.zip

The one of this topic, as indicated is for Clone Ferrari V2-V3 (and compatible with Original Boxes).

Admin
Posted by: yassine

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 10/14/20 12:51 PM

youtube and E2iplayer don't work with all ferrari openpli; black hole
but works perfectly with Pbnigma 5.1 for vuuno
which pythons must we add in openpli .?
Posted by: Admin

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 10/14/20 01:38 PM

You need replace the Tuner, with an original one or replace the security chip with the VUJ. Drivers for v2-3 Ferrari are too old to support this. So you need more recent image/software and so, drivers.

Admin

Originally Posted By: yassine
youtube and E2iplayer don't work with all ferrari openpli; black hole
but works perfectly with Pbnigma 5.1 for vuuno
which pythons must we add in openpli .?
Posted by: yassine

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 10/16/20 08:40 PM

but why all is ok with Pbnigma 5.1?
its old (2016, kernel 3.1.1) like us openpli
Posted by: Toysoft

Re: VU+ Uno v3 Daily Build : OpenPLi 4.0 IPTV (v3) - 10/16/20 09:00 PM

There is only one way, to recompile all the OpenPLi (or the image needed) with the older kernel/drivers, but that's a lot of work, and not worth the time... as there is the cheap solution of the VUJ Board/Chip, and on the Uno just replacing the clone tuner by an original one.

Admin

Originally Posted By: yassine
but why all is ok with Pbnigma 5.1?
its old (2016, kernel 3.1.1) like us openpli