DM800 control impossible

Posted by: andr3wz

DM800 control impossible - 05/31/17 02:12 PM

Hi,I have upgraded my DM800HD to Openpli v.22 cklean image with the intention of solving the problem of the remote control that doesn't respond to comands.
I did not solve this problem though, the remote control buttons however blink when I press them, maybe is an hw issue on the receiver.
What puzzles me is the fact that I can no longer access with the default credentials or changed on the web interface and have not the ability to change channels.
What puzzles me is the fact that I can no longer access the default credentials on web interfaces and nn have the ability to change channels.
At startup when prompted to do a restore of settings I can not select no with the remote control for the problem above...
Telent is ok, the credentials are the same
Posted by: Admin

Re: DM800 control impossible - 05/31/17 03:49 PM

Try another Remote Control,

And try to reflash the image "clean" with the Bad Sector Recovery enabled, perhaps it could help, also be sure you have enough Flash space available before adding anything... if not do the clean script to get some Flash available, less then 1 Mb at the final is not good, and you need to have 2-3 Mb at least before any installation.

Admin
Posted by: andr3wz

Re: DM800 control impossible - 05/31/17 04:10 PM

How can activate the bad sector from web?
Posted by: Admin

Re: DM800 control impossible - 05/31/17 04:36 PM

You have all tips here,

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=79&page=1

Like the Bad Sector Recovery, the "To adjust the remote/RC sensibility", "Free as much as possible Flash space", etc.

Admin
Posted by: andr3wz

Re: DM800 control impossible - 06/03/17 01:26 PM

I think it's a remote control issue at this point ... I've got a backup from an old backup and I manage it from owif for now frown
Posted by: Admin

Re: DM800 control impossible - 06/03/17 02:46 PM

Ok, could then be the IR on the RC or the frontpanel

Admin
Posted by: andr3wz

Re: DM800 control impossible - 06/15/17 12:57 PM

Remote control looks fine, the front panel has problems, lcd diplay no longer lights up...I don't find any replacement piece... cry
Posted by: Admin

Re: DM800 control impossible - 06/15/17 01:29 PM

You need to check for this part, but you probably can just change the I/R on the board, as it's already mostly dead, it's not of much risks at this point.

Here is one, expensive, but you probably can find if you ask on the Sat Italian Forums, as there is for sure few DM800HD around for parts.

Part to ask for : http://www.ebay.it/itm/Ersatz-LCD-Oled-Display-fur-DM800-se-/331788535153

Admin
Posted by: Johnny_B

Re: DM800 control impossible - 06/16/17 12:00 AM

Hmm in that case selling for that price I'm a rich guy because I have allot of brand new displays from the dm800hd which were a gift from Dreambox China. laugh

But if he needs one much cheaper than the ebay seller, just give me a Pm for more details.