Flash a clone

Hi, I want to upgrade my inetbox 800hd pvr for use IPTV.I know that ferrari card on board is too small for install an OE 2.0 image, so someone told me about Japhar card...I have some doubt that hpe you can solve
- My stb has the ssl82f, it can be mounted and become active without any issue or I have to change the ssl?
- Which of the two cards (nc3 or b14) is the best for me?
- Which type of image I have to load?

Dear andr3wz,

Thank you for your post and questions, so having a DM800HD clone box (in your case a inetbox, based on Ferrari Sim), you can upgrade the box with no problem to a newer image and Sim.

To gain IPTV the solution you have is the OpenPli 4.0 IPTV from MastaG / Team Japhar.

- To do so, you need to replace the sim by the Japhar Supersim3 NC3 (removing the old Ferrari).

- Then with the Japhar Sim in the box (that acts as a Ferrari), you will press the ON/OFF Frontpanel button when you turn on the box, until you see the STOP message on the LCD with the IP Address. You need to keep connected the box to the Router to have it.

- This done, you will have to flash only the SSL84J.NFI (File Attached).

- Reboot the box and again press the ON/OFF until you see the STOP message on LCD with IP address.

- This done you can flash the OpenPli 4.0 IPTV and will have IPTV in your box !

You can download it here : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=2294#Post2294

TS

P.S.: For Japhar Forum Members, you can go to http://www.japhar.com/japhar/ for the NC3 SuperSim3 Sim, that is 15% cheaper than on Ebay. Specially for members here. The B14 is a Ferrari Sim, so exactly what you already have in your box.

Thank you TS, always explicit and clear
I can flash via browser?

Toysoft, I asked for info via pm.

Thank you and happy new year!

Flashed with OpenPli4.0_withIPTv_beta13, great...but it so hard to install some plugin...
FlashExpander does not work, it crashes my dm before install it...
How can i fix?

Did you tried this ?

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=5272

Admin

follow link to download for ipk you must first check the free memory to download it

Plugin utile per Dreambox con 64mb flash.


http://www.ourdreambox.com/ubbthreads.php?ubb=showthreaded&Number=2588#Post2588

Trying now, it seems to work

Filesystem Size Used Available Use% Mounted on
/dev/root 60.0M 36.2M 23.8M 60% /
tmpfs 64.0K 0 64.0K 0% /media
/dev/sda1 293.4G 149.7G 143.7G 51% /media/hdd
tmpfs 71.0M 5.0M 66.0M 7% /var/volatile
/dev/sdb1 3.6G 126.7M 3.5G 3% /media/usb