Posted by: JojoCG
Two 800hd one positioner - 03/07/16 11:40 PM
It is posiblle to connect two 800HD to control one usals motor?
Posted by: gaga24
Re: Two 800hd one positioner - 03/08/16 01:14 AM
And to get what? Not possible, one has to be always off.
Posted by: Admin
Re: Two 800hd one positioner - 03/08/16 01:27 AM
Probably you can connect one to the usals motor, as the master, and the second will stay slave (having like a Dual LNB, the second cable going to the slave box when the first master box will tell to the Motor where to be).
Admin
Posted by: JojoCG
Re: Two 800hd one positioner - 03/08/16 08:52 PM
I thought so,reading forums on the net i bumped into discusion about "smart diseqc switch" how is "capabile" to switch control of motor between two reciver's, and i just wanted your opinion.Thanks!
Posted by: Toysoft
Re: Two 800hd one positioner - 03/08/16 09:06 PM
We don't know a "smart diseqc switch" for usals that would allow 2 boxes to work together, perhaps you have to ask there and post here what they tell, as we all learn every day ;o)
TS
Posted by: JojoCG
Re: Two 800hd one positioner - 03/09/16 02:12 AM
***Splitter with smart operation.
There are splitter - switches that enable the last input that a voltage was changed on them.
So if you turn off dm800 and its on input B then the power will pass only from that one.***
Posted by: Admin
Re: Two 800hd one positioner - 03/09/16 02:17 AM
Good, thank you, so yes definitely only 1 can work at a time, and the other one must be off or not active. Hopefully you must not remove the cable ;o), and all is "automatic", but be sure nobody in the family turn on the other one while you use the first box.
Admin
Posted by: JojoCG
Re: Two 800hd one positioner - 03/09/16 02:25 AM
This confirms gaga24 story , always one off!!!
Posted by: JojoCG
Re: Two 800hd one positioner - 03/09/16 02:39 AM
Thanks a lot people, if I come up with somthing smarter,I will ask you for opinion.