Posted by: starec
Dreambox DM800HD Original - 04/12/16 03:18 AM
Dreambox 800HD the original is not one image openpli 4 well! Disaster!
Dreambox DM800HD Original
Posted by: Admin
Re: Dreambox DM800HD Original - 04/12/16 03:41 AM
Dream Multimedia stopped / RIP / EOL the DM800HD in 2013, and all development stopped then for original boxes. Because they wanted you to change your box to a newer one.
The latest OpenPli for Original boxes, is the OpenPLi 2.1 that you can find on the Official Website of OpenPLi here, so all other 3.0 and 4.0 were never built for DM800HD due to the EOL of the DM800HD in 2013. See here : http://openpli.org/download/dreambox/dm800/
You have the original images here, but naturally starting to become older and older : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=104&page=1
Only Clone teams continued the support, but today EStar, Ferrari and Sim2 stopped that support. The only Team who continues support is the Team Japhar.
So if you really want your DM800HD to continue to work well and have latest software it's highly wished to upgrade to the Japhar Sim, and you will then have access to all the Japhar DM800HD SuperSim3 images, as well as all the Ferrari images and all the Sim2 2.01/2.10 images.
Here you will find all the images supported by the Japhar NC3 sim that you can find here, http://www.japhar.com/japhar/
Images for Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=47&page=1
Have a good evening ;o)
Admin
The latest OpenPli for Original boxes, is the OpenPLi 2.1 that you can find on the Official Website of OpenPLi here, so all other 3.0 and 4.0 were never built for DM800HD due to the EOL of the DM800HD in 2013. See here : http://openpli.org/download/dreambox/dm800/
You have the original images here, but naturally starting to become older and older : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=104&page=1
Only Clone teams continued the support, but today EStar, Ferrari and Sim2 stopped that support. The only Team who continues support is the Team Japhar.
So if you really want your DM800HD to continue to work well and have latest software it's highly wished to upgrade to the Japhar Sim, and you will then have access to all the Japhar DM800HD SuperSim3 images, as well as all the Ferrari images and all the Sim2 2.01/2.10 images.
Here you will find all the images supported by the Japhar NC3 sim that you can find here, http://www.japhar.com/japhar/
Images for Japhar : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=47&page=1
Have a good evening ;o)
Admin
Posted by: starec
Re: Dreambox DM800HD Original - 04/12/16 05:53 PM
Thank you, but here's the thing, I will give as openpli 4.0 with IPTV and GStreamer 1.6.2., the update over the web, but then it gets stuck in the boot and half over!
Posted by: Admin
Re: Dreambox DM800HD Original - 04/12/16 06:50 PM
As explained, the images are built to run with the Japhar Sim, and we only can support with Japhar Sim as we have no idea why you have problems with other hardware/sims.
To be in the exact same condition as us, so we can give support as we can replicate your problem and find a solution, you need to have a Japhar sim in your box.
But you can still use this image version (with your DM800HD Original with Original sim) built with 1.6.2 GStreamer. The image is already a hell in advance compared with all other images for Original DM800HD boxes. If you want to use the latest image, you should think to upgrade your sim in your box to Japhar.
Admin
To be in the exact same condition as us, so we can give support as we can replicate your problem and find a solution, you need to have a Japhar sim in your box.
But you can still use this image version (with your DM800HD Original with Original sim) built with 1.6.2 GStreamer. The image is already a hell in advance compared with all other images for Original DM800HD boxes. If you want to use the latest image, you should think to upgrade your sim in your box to Japhar.
Admin
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/01/16 01:15 AM
Running latest Open Pli with Japhar NC3 on my DM800HD but I keep having crashes while trying to scan& save packages on 42E for example.
Here is the crash log-
<833563.675248> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
<833563.675884> [eDVBFrontend] prepare_sat System 0 Freq 12746000 Pol 1 SR 2222000 INV 2 FEC 0 orbpos 420 system 0 modulation 1 pilot 2, rolloff 0
<833563.676275> [eDVBFrontend] tuning to 2146 mhz
<833563.676546> [eDVBChannel] OURSTATE: tuning
<833563.689465> [eDVBFrontend] set static current limiting
<833563.696691> [eDVBFrontend] setTone 0
<833563.713484> [eDVBFrontend] sleep 25ms
<833563.739172> [eDVBFrontend] set sequence pos 7
<833563.739784> [eDVBFrontend] invalidate current switch params
<833563.859654> [eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
<833563.861853> [eDVBFrontend] sleep 50ms
<833564.030637> [eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)
<833564.051678> [eDVBFrontend] sleep 150ms
<833564.333640> [eDVBFrontend] sendDiseqc: e01038f9(?)
<833564.335283> [eDVBFrontend] sleep 50ms
<833564.385674> [eDVBFrontend] set sequence pos 3
<833564.386512> [eDVBFrontend] setTone 1
<833564.397808> [eDVBFrontend] sleep 10ms
<833564.408276> [eDVBFrontend] update current switch params
<833564.408853> [eDVBFrontend] startTuneTimeout 20000
<833564.409426> [eDVBFrontend] setFrontend 1
<833564.409730> [eDVBFrontend] setting frontend 0
<833564.440234> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
<833564.441499> [eDVBFrontend] sleep 500ms
<833564.451450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 2
<833564.572328> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 3
<833564.942729> [eDVBFrontend] set dynamic current limiting
<833565.023450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 4
<833566.866484> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 5
<833567.322302> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 6
action -> SetupActions save
ok
<833575.822504> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 7
<833576.284415> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 8
<833578.000309> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 9
action -> SetupActions save
ok
<833578.462957> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 10
<833580.894419> [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC
<833580.895745> [eDVBLocalTimerHandler] getRTC returned time=0. RTC problem?
<833584.409318> [eDVBChannel] OURSTATE: failed, fatal
<833584.409959> [eDVBScan] no channels left: 69 scanned, 137 unavailable, 68 database.
<833584.480408> [eBouquet] couldn't write file userbouquet.LastScanned.tv
<833584.480823> [eDVBDB] Renumbering...
<833584.489566> [eDVBDB] ---- saving lame channel db
<833584.490390> FATAL: [eDVBDB] couldn't save lame channel db!
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Here is the crash log-
<833563.675248> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
<833563.675884> [eDVBFrontend] prepare_sat System 0 Freq 12746000 Pol 1 SR 2222000 INV 2 FEC 0 orbpos 420 system 0 modulation 1 pilot 2, rolloff 0
<833563.676275> [eDVBFrontend] tuning to 2146 mhz
<833563.676546> [eDVBChannel] OURSTATE: tuning
<833563.689465> [eDVBFrontend] set static current limiting
<833563.696691> [eDVBFrontend] setTone 0
<833563.713484> [eDVBFrontend] sleep 25ms
<833563.739172> [eDVBFrontend] set sequence pos 7
<833563.739784> [eDVBFrontend] invalidate current switch params
<833563.859654> [eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
<833563.861853> [eDVBFrontend] sleep 50ms
<833564.030637> [eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)
<833564.051678> [eDVBFrontend] sleep 150ms
<833564.333640> [eDVBFrontend] sendDiseqc: e01038f9(?)
<833564.335283> [eDVBFrontend] sleep 50ms
<833564.385674> [eDVBFrontend] set sequence pos 3
<833564.386512> [eDVBFrontend] setTone 1
<833564.397808> [eDVBFrontend] sleep 10ms
<833564.408276> [eDVBFrontend] update current switch params
<833564.408853> [eDVBFrontend] startTuneTimeout 20000
<833564.409426> [eDVBFrontend] setFrontend 1
<833564.409730> [eDVBFrontend] setting frontend 0
<833564.440234> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
<833564.441499> [eDVBFrontend] sleep 500ms
<833564.451450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 2
<833564.572328> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 3
<833564.942729> [eDVBFrontend] set dynamic current limiting
<833565.023450> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 4
<833566.866484> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 5
<833567.322302> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 6
action -> SetupActions save
ok
<833575.822504> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 7
<833576.284415> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 8
<833578.000309> [eDVBFrontend] (0)fe event: status 3, inversion off, m_tuning 9
action -> SetupActions save
ok
<833578.462957> [eDVBFrontend] (0)fe event: status 1, inversion off, m_tuning 10
<833580.894419> [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC
<833580.895745> [eDVBLocalTimerHandler] getRTC returned time=0. RTC problem?
<833584.409318> [eDVBChannel] OURSTATE: failed, fatal
<833584.409959> [eDVBScan] no channels left: 69 scanned, 137 unavailable, 68 database.
<833584.480408> [eBouquet] couldn't write file userbouquet.LastScanned.tv
<833584.480823> [eDVBDB] Renumbering...
<833584.489566> [eDVBDB] ---- saving lame channel db
<833584.490390> FATAL: [eDVBDB] couldn't save lame channel db!
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Posted by: Admin
Re: Dreambox DM800HD Original - 05/01/16 01:20 AM
That's normal, you don't have enough Flash memory available, run the script or do some "cleaning",
Admin
Read : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=7115#Post7115
Admin
Read : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=7115#Post7115
Quote:
<833584.480408> [eBouquet] couldn't write file userbouquet.LastScanned.tv
<833584.480823> [eDVBDB] Renumbering...
<833584.489566> [eDVBDB] ---- saving lame channel db
<833584.490390> FATAL: [eDVBDB] couldn't save lame channel db!
<833584.480823> [eDVBDB] Renumbering...
<833584.489566> [eDVBDB] ---- saving lame channel db
<833584.490390> FATAL: [eDVBDB] couldn't save lame channel db!
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/01/16 03:07 PM
Thanks!
In which folder to put the script file ?
In which folder to put the script file ?
Posted by: Admin
Re: Dreambox DM800HD Original - 05/01/16 04:07 PM
Just run it, you can also run it from the JAM 5.2 where we included it to have it easy for members (but be careful as it could remove your language from the box... so could be better if not IT/FR/GR/ES/UK/EN, to run the script omitting the right language for your country).
Admin
Admin
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/01/16 05:42 PM
Sorry for the ignorance but I may be not so familiar how "just to run it.." I an used to have the scripts in the scripts folder and to run it from the DM . Appreciate if you can guide me how to "run" it...
Posted by: Toysoft
Re: Dreambox DM800HD Original - 05/01/16 06:06 PM
Sure no problem ;o)
Copy the data from the box below,
But seeing your country of origin, that language was removed so here it is with your country of origin language as well kept (not removed as the precedent one).
So your country, as well as FR, IT, ES, UK/EN, DE are kept with that script. All other are removed.
So you copy the text from the second box above and then login into your box with telnet or ssh, and paste all that text into the console, it will do the job for you. You should then gain 3-4 Mb more of Flash.
TS
Copy the data from the box below,
Code:
#!/bin/sh # #Remove from /usr/share/enigma2/countries # cd /usr/share/enigma2/countries # rm ad.png rm ee.png rm hr.png rm lt.png rm ro.png rm ua.png rm ae.png #rm en.png rm hu.png rm lv.png rm ru.png rm yu.png rm bg.png #rm es.png rm il.png rm se.png rm br.png rm fi.png rm ir.png rm nl.png rm si.png rm cz.png #rm fr.png rm is.png rm no.png rm sk.png #rm de.png rm fy_NL.png #rm it.png rm pl.png rm th.png rm dk.png rm gr.png rm ku.png rm pt.png rm tr.png #rm missing.png # #Remove from /usr/share/enigma2/po # cd /usr/share/enigma2/po # rm -r ar rm -r cs rm -r el rm -r et #rm -r fr rm -r hr #rm -r it rm -r lv rm -r no rm -r pt_BR rm -r sk rm -r sv #rm -r uk rm -r bg rm -r da #rm -r en rm -r fa rm -r fy rm -r hu rm -r ku rm -r nb rm -r pl rm -r ro rm -r sl rm -r th rm -r ca #rm -r de #rm -r es rm -r fi rm -r he rm -r is rm -r lt rm -r nl rm -r pt rm -r ru rm -r sr rm -r tr # #Remove not used Skins # rm -r /usr/share/enigma2/PLi-FullHD rm -r /usr/share/enigma2/PLi-FullNightHD rm -r /usr/share/enigma2/PLi-HD1 rm -r /usr/share/enigma2/PLi-HD2 # #Remove Feeds Packages List # rm /var/lib/opkg/O* # #END #
But seeing your country of origin, that language was removed so here it is with your country of origin language as well kept (not removed as the precedent one).
Code:
#!/bin/sh # #Remove from /usr/share/enigma2/countries # cd /usr/share/enigma2/countries # rm ad.png rm ee.png rm hr.png rm lt.png rm ro.png rm ua.png rm ae.png #rm en.png rm hu.png rm lv.png rm ru.png rm yu.png rm bg.png #rm es.png #rm il.png rm se.png rm br.png rm fi.png rm ir.png rm nl.png rm si.png rm cz.png #rm fr.png rm is.png rm no.png rm sk.png #rm de.png rm fy_NL.png #rm it.png rm pl.png rm th.png rm dk.png rm gr.png rm ku.png rm pt.png rm tr.png #rm missing.png # #Remove from /usr/share/enigma2/po # cd /usr/share/enigma2/po # rm -r ar rm -r cs rm -r el rm -r et #rm -r fr rm -r hr #rm -r it rm -r lv rm -r no rm -r pt_BR rm -r sk rm -r sv #rm -r uk rm -r bg rm -r da #rm -r en rm -r fa rm -r fy rm -r hu rm -r ku rm -r nb rm -r pl rm -r ro rm -r sl rm -r th rm -r ca #rm -r de #rm -r es rm -r fi rm -r he #rm -r is rm -r lt rm -r nl rm -r pt rm -r ru rm -r sr rm -r tr # #Remove not used Skins # rm -r /usr/share/enigma2/PLi-FullHD rm -r /usr/share/enigma2/PLi-FullNightHD rm -r /usr/share/enigma2/PLi-HD1 rm -r /usr/share/enigma2/PLi-HD2 # #Remove Feeds Packages List # rm /var/lib/opkg/O* # #END #
So your country, as well as FR, IT, ES, UK/EN, DE are kept with that script. All other are removed.
So you copy the text from the second box above and then login into your box with telnet or ssh, and paste all that text into the console, it will do the job for you. You should then gain 3-4 Mb more of Flash.
TS
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/01/16 08:55 PM
Many thanks. Will try & report...
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/04/16 02:48 PM
Script run, Same problem: After scan complete - crashes...
Posted by: Admin
Re: Dreambox DM800HD Original - 05/04/16 04:02 PM
Remove the folder crossepg in the /hdd, generally it is the reason of CrossEPG crash, needs to replace the old data files.
Admin
Admin
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/05/16 01:21 AM
Do not have such folder.................
Posted by: Toysoft
Re: Dreambox DM800HD Original - 05/05/16 01:33 AM
If you use crossepg, in /hdd you have crossepg, or where you have crossepg data loaded, as per the configuration of CrossEPG.
Check the subfolder, /media that has inside the hdd, usb, etc.
TS
Check the subfolder, /media that has inside the hdd, usb, etc.
TS
Posted by: pazitush
Re: Dreambox DM800HD Original - 05/06/16 02:05 PM
I have the sub folder /media, but nothing inside.......
Posted by: Admin
Re: Dreambox DM800HD Original - 05/06/16 04:52 PM
You then need to create a hdd (mkdir hdd)
Admin
Admin