DM800HDseV2, where is the Simcard ?

Tag Fight
Japhar
For the DM800HDseV2 (original) ... I opened the referred box ... and I can not find the card no yes.to make the exchange - does anyone know if this box DM800HDseV2 if you have a card yes ... Thank you ..

You dont bother us, no problem. Hopefully the Japhar sim is reflashable and you can flash the OS for the DM800HDpvr instead with a PC/SC Smartcard Reader like the GCR2.

You can also remove the simcard chip (in front of the smartcard slots) and solder a sim card support to fit in the DM800HDseV2 box the japhar sim instead of the smartcard chip.

Admin

Thank you ..

Hello
Ok I got the same original box, burnt a clone so I took back the one I gave to my sister
so the only way is to remove the little chip with the yellow dot, I suppose desolder it and solder
this :
https://jam3.japhar.com/japhar/index.php/product/sim-socket/ ?
so I can use one of my japhar sim

Thank you for feedback

edit :
I suppose you need to flash FIRST secondstage-dm800sev2_allsim.nfi before removing chip or ?

Yes, exactly, see below the security chip to be removed and insert the Sim Socket, then you can install the Japhar Sim,



Before removing the chip, just load for security the allsim file, so like that you will have no issue later as it will accept any chip/sim until you flash the right image for the sim installed.

Admin

Thank you .. will do that soon ..

Don't throw away the old chip naturally, it can be always useful.

Your sim socket is on the post, you should have it tomorrow.

Admin