Which DM800HDse do you have ? V1 or V2 ?

Which DM800HDse do you have ? V1 or V2 ?

Look at the bottom of the box, the Serial Number Sticker,

V1 will not show v1 version, only DM800HDse,



V2 will be indicated for the V2 model (DM800HDse V2),



Admin

Model: DM800 HDse
S/N AB1915100029056
MAC 00:09:34:9B:0B:56

Hopfully it could be working.

Yes, so you have DM800HDse v1,

Admin

Nothing to do? I remember I used some file to manage fix to the SIM210 work again.

Yes, you can try to recover the box with the NO CA ERROR tutorial, but you will be stuck with that sim that is no more supported since at least 3-4 years, and have old and doggy images... really better to do the jump to the Japhar sim for that box (your box will look as a new box !), and that way also you support the Forum and the servers that provide the feeds to all Japhar images ;o).

Tutorial : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15214#Post15214

Admin

So I can use Japhar sim even if it is a DM800 HDse and not a v2?

Is it tricky to go from my chrached Sim "BIOS NO CA" to Japhar? If not so tricky I would like to try it.

Is it only to change Sim or have I to do some tricky updatings etc?

Yes, the Japhar sim is available for the DM600pvr, the DM800HDpvr, the DM800HDse v1, the DM800HDse V2, the DM500HD (v1), the DM520HD and DM525HD as well as DM900UHD.

Sim DM800HDse V1 Japhar : https://jam3.japhar.com/japhar/index.php/product/japhar-dm800se/

It's easy to upgrade, same as changing the sim card in a smartphone or mobile phone. The procedure is very simple, and if you flashed into the box a Japhar image, you wil have nothing to do, just insert the Japhar and the box will work immediately without doing anything.

Admin

But in my case with BIOS NO CA FOUND, is it just to insert the Japhar sim without any further operations???

------

But now In ruined the SIM-holder. So I suppose I may put the box into the binn......

The Sim Holder is simple to replace (you have to break it in pieces gently to not break the 8 solder points in the two sides, and with 6 Euro you have a new Sim Holder, and the box will be like new.

Sim Holder : https://jam3.japhar.com/japhar/index.php/product/sim-socket/

Yes, the replacement of the sim is very simple, as a mobile phone. Naturally you have to gently open the sim holder. If you broke it it's possible to block it once you have the sim inside or better replace the sim holder/socket as it's only a 6 Euro part.

Japhar Sim : https://jam3.japhar.com/japhar/index.php/product/japhar-dm800se/

Admin

Hmm, I was not so careful. I ruind 4 solder points......

Then next is to post on Johnny's Dreambox Hardware board, http://www.jb8a8f8.com/ and he will tell you where are the missing points on the motherboard so you can put wires. It's not a difficult fix he knows everything about the DM800HDse and will tell you exactly how to restore the 4 broken points (in fact there is only 6 points important, as 2 are not used so if you are lucky you could have to restore only 2).

Example of the 8 points in fact 6 on the DM900UHD, see image below. A member with a DM900UHD ruined all the contacts and with Johnny's help he completely fixed his DM900UHD.



Admin

OK, thanks!

hello admin i am in abidjan in west africa and i have dm800se v.1 and after going through your website i found that with japhar sim my box can become special like a new which japhar sim did you advice to buy and how much will it cost me to have as soon as possible.

Hello,

You can buy it directly thru the eshop of the team with a credit card. The shipping cost is included.

https://jam3.japhar.com/japhar/index.php/product/japhar-dm800se/

Once you will receive it, we will help you to install and use it.

TS