DM800HDse "NO CA ERROR" / "SERIAL MODE" Help

Posted by: marchino08

DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/04/20 12:45 PM

Hi All,
I am new to this Dreambox business but appears to be full on with things you can do.
I am trying to get my Dreambox DM800se to work.
After not using it for few years I decided to turn it on but it would get stuck on the loading screen I think it was newnigma2 but I was still able to go to menu and do all the settings stuff but the programs would play up / freezing up all the time.
I went to dreamboxupdate.com and download a firmware and uploaded using network and since I get "NO CA ERROR" on the screen.
I downloaded Japhar Flasher 1.1 and tried to flash with "secondstage-dm800se-84-allsim" but I get an error message:
lcd***SERIAL MODE***
I have SIM2 in my box (sim2.10).
Not sure what is the right order/way to get this thing to work.
If someone can help that would be much appreciated?
Posted by: Admin

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/04/20 02:07 PM

Hello Australia,

Here you have the Tutorial on how to restore your box, but remember that you have a Sim2 2.10 inside, so you can only flash to the box Sim2 images/software.

Tutorial NO CA ERROR : http://www.ourdreambox.com/ubbthreads.ph...20DM800HDse.rar

You will have to do as explained in the PDF Tutorial above.

As we are the Japhar Sim Forum, we don't have images from (dead) other teams. So you will need to go on internet and try to find an image for your DM800HDse v1 box.

If you want to replace the old unsupported Sim2 sim, you can put a Japhar Sim and then will have access to all the Japhar Images for DM800HDse v1 from the link below.

Japhar Images : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=48&page=1

Japhar Sim : https://jam3.japhar.com/japhar/index.php/product/japhar-dm800se/

Have a nice weekend, and stay safe at home !

Admin
Posted by: Emil Amerasinghe

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/07/20 12:51 PM

Hi

I need a second stage ssl89 image for my dreambox 800hd se v2. I appreaciate if you could extend me a helping hand. It was there in this page now that I cannot find. Thank you.

knsl
Posted by: Emil Amerasinghe

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/07/20 12:55 PM

Hi
what are the following errors
1. "no ca error"
2. " serial mode '
3. cccam error - CAs not supported

in that case how to fix the box ?
Posted by: Toysoft

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/07/20 12:55 PM

See this topic,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=16897

You can fix the box only using the DreamUp software or JapharFlasher, with a RJ45 cable from Box to Router/Modem, and a USB cable from service mini-usb port of the Box to the PC USB port. See the Tutorial about NO CA ERROR below,

NO CA Error : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15214#Post15214

You can then use images only from the link below, as your box is an Original DM800HDse V2 box.

Original Images : http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=171&page=1

TS
Posted by: Emil Amerasinghe

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/07/20 01:19 PM

hi
my dream box displays "dreambox 800hd se v2" image when turned on. I want to switch same into openPli image ssl89.

the Oscam does not run the servers. how to fix this issue to watch tv. anyone is hear to help me to configure this issue in DCC to get the oscam running. thank you
Posted by: Emil Amerasinghe

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/07/20 01:20 PM

Hi

My dream box displays "dreambox 800hd se v2" image when turned on. I want to switch same into openPli image ssl89.

The Oscam does not run the servers. How to fix this issue to watch tv. Anyone is hear to help me to configure this issue in DCC to get the oscam running.

Thank you.
Posted by: Admin

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/07/20 01:25 PM

There is no official OpenPLi for DM800HDse V2, you can see below the official page from OpenPLi, where there is no V2 (your box).

OpenPLi Official : https://www.openpli.org/download/dreambox/

The only image you can find, that is suitable for your DM800HDse V2, that is not official is the one below, from Japhar Team to the community.

DM800HDse V2 Original Box OpenPLi : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=17593#Post17593

You have to work it by yourself (setup, bug fixes etc), as Japhar Team is only giving support to boxes upgraded to Japhar Sim.

Admin
Posted by: Emil Amerasinghe

Re: DM800HDse "NO CA ERROR" / "SERIAL MODE" Help - 04/09/20 03:37 AM

I appreciate the reply. thank you very much