Posted by: Admin
CFE file for Vu+ Solo² - 06/08/15 01:36 AM
CFE file for Vu+ Solo²
How to dump yourself the CFE from a box ? For VU+ Solo2,
nanddump -nf /tmp/mtd3 /dev/mtd3
(Previously load the nanddump file you can download here into the /tmp folder, you can use for easily doing it "WinSCP" in FTP mode, then go with Telnet on /tmp folder with "cd /tmp" and then send the command above. Don't forget to set nanddump to 755 rights, that is "chmod 755 /tmp/nanddump" with Telnet)
TS
root@vusolo2:~# cat /proc/mtd
dev: size erasesize name
mtd0: 0e100000 00020000 "rootfs"
mtd1: 0e100000 00020000 "rootfs(redundant)"
mtd2: 00700000 00020000 "kernel"
mtd3: 00100000 00020000 "mac"
mtd4: 0d6d2000 0001f000 "rootfs"
Driver to download (MEGA)
Remark : Before flashing with JTAG, check the Flash chip you have.
Samsung K9F1G08U0A, Samsung K9F2G08U0C etc...
Full BIN file with CFE and OpenPLi 7.3 release, download below, https://mega.nz/file/jc1RFQyD#VR86xQctSt3mN32A6DhvOgJmkoUujZVoaFlSrcFmPy0
How to dump yourself the CFE from a box ? For VU+ Solo2,
nanddump -nf /tmp/mtd3 /dev/mtd3
(Previously load the nanddump file you can download here into the /tmp folder, you can use for easily doing it "WinSCP" in FTP mode, then go with Telnet on /tmp folder with "cd /tmp" and then send the command above. Don't forget to set nanddump to 755 rights, that is "chmod 755 /tmp/nanddump" with Telnet)
TS
root@vusolo2:~# cat /proc/mtd
dev: size erasesize name
mtd0: 0e100000 00020000 "rootfs"
mtd1: 0e100000 00020000 "rootfs(redundant)"
mtd2: 00700000 00020000 "kernel"
mtd3: 00100000 00020000 "mac"
mtd4: 0d6d2000 0001f000 "rootfs"
Driver to download (MEGA)
Remark : Before flashing with JTAG, check the Flash chip you have.
Samsung K9F1G08U0A, Samsung K9F2G08U0C etc...
Full BIN file with CFE and OpenPLi 7.3 release, download below, https://mega.nz/file/jc1RFQyD#VR86xQctSt3mN32A6DhvOgJmkoUujZVoaFlSrcFmPy0
