12427 Members
237 Forums
7732 Topics
23828 Posts
Max Online: 4756 @ 02/20/20 11:12 PM
|
|
|
12 registered (Toysoft, b1i2s3h4a5, gedis, Smokey, samochod3, maros306604, Admin, franco1939, marcopiu, mikoch, hecruze, tester27),
871
Guests and
495
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
|
#379 - 02/03/15 09:24 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 01/24/15
Posts: 3
|
My great thanks to u and ur team my VID/PID is 148f/3572. but the driver of rt3572 not work nor rt 2870.but when i installed open pli 3 for dreambox 800se sim 2.10 the driver worked soo good.but the tune failed as there is no patched driver for dm800se ferrariboot 84f.
|
Top
|
|
|
|
|
#380 - 02/03/15 09:29 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 01/24/15
Posts: 3
|
On open pli the diver was rt 2800 and worked soo good.but for driver 3.2. So i need the driver of 2800 for 2.6.18-7.4-module.
|
Top
|
|
|
|
|
#381 - 02/03/15 07:14 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
Try this one, from post below, named : wifi_1.0a_dm800se.ipk http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=242#Post242 Admin P.S.: But the best would be to swap your sim to the new sim Japhar that will support the latest images, so you will have no more problems with Wifi drivers.
_________________________
|
Top
|
|
|
|
|
#392 - 02/17/15 04:50 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 02/17/15
Posts: 5
|
hello i would like to ask for help i searching over google tons of forums registered everywhere i cant make any dongle to work on my DM500HD Ferrari Sim i will post full info here if someone can help me to try make it work i will be gratefull i use newnigma2 3.3.2 :
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=148f ProdID=5372 Rev= 1.01 S: Manufacturer=Ralink S: Product=802.11 n WLAN S: SerialNumber=1.0 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
also i got onother wifi dongle TL-WN823N RTL8192CU chipset somehow i manage to make it reconize in the network but soon as i press adapter settings it crash all the newnigma green screen and restart in 10 seconds ... sorry for my bad english thanks upfront for any help
also uname -a
Linux dm500hd 2.6.18-7.4-dm500hd #1 SMP Tue Mar 27 08:48:34 UTC 2012 7405b0-smp GNU/Linux
|
Top
|
|
|
|
|
#394 - 02/18/15 12:01 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 02/17/15
Posts: 5
|
thank you very much i tryed with the RALINK driver with rt5370sta_2.5_dm500hd-mipsel.ipk its now working its showed in the network that i have instered USB DONGLE but soon as i enter it and press adapter setting again green screen and restart after 10 seconds it wont activate the dongle soon as it start its crashing same as the second dongle its showed in the network everything good but soon as i try to active it its crashing but still i got PID AND VID maybe you could help me more or tell me do i change the newnigma2 to openpli or any other software maybe it wont crash ... because its impossible drivers to be loaded and soon as i try to set it up to crash ps : PID AND VID FOR THE TPLINK
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8178 Rev= 2.00 S: Manufacturer=802.11n S: Product=USB WLAN S: SerialNumber=00e04c000001 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192cu E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=125us
thank you alot you are the only person that helped me the best way now but im still gonna search to find out why its crashing the newnigma2
|
Top
|
|
|
|
|
#395 - 02/18/15 12:56 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
Yes, try with these drivers but on OpenPLi image, you have much more chances that it works. You can also try the image OpenPLi 2.1 with RALINK RT537x built-in, on link below, all is ready and could work directly. https://mega.nz/#!BcVU3abC!1rNh8oJZudKsrURsF6PHbalxmg3EAB_cecLyC3Mg0m8 Admin
_________________________
|
Top
|
|
|
|
|
#396 - 02/18/15 05:47 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 02/17/15
Posts: 5
|
thank you very very very much i manage to make the TPLINK dongle work but the problem was in the newnigma2 its crappy but when i installed openpli + the drivers you gave me the TPLINK worked the RALNIK worked reconized but when i press to scan does not find any networks im trying now to find the rt5370sta_2.5_dm500hd-mipsel.ipk but for dm800hd se for the original dreambox i got but thank you alot for the great support im very gratefull
|
Top
|
|
|
|
|
#398 - 02/18/15 06:06 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 02/17/15
Posts: 5
|
i understand you but my dreambox ferrari dm 500 hd is the old ferrari sim its not the new and it have ssl87 i need to get the new sim or something somehow someone need to guide me with that and i installed openpli from other forum that i know its working with my dreambox ferrari sim not that i do not want to install your image
|
Top
|
|
|
|
|
#399 - 02/18/15 06:08 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
Just install it, it will work, and if you are happy of the image to have it to work at the best, just then order the new sim Japhar from http://www.japhar.com/japhar/The image above works fine for BOTH, Japhar and Ferrari... but it's better for future support to have the Japhar installed. So if you are happy and it works well, get the Japhar then. Admin
_________________________
|
Top
|
|
|
|
|
#1928 - 07/05/15 12:15 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 07/04/15
Posts: 1
|
hello! im new to this forum i read the postes here about RT5370 wireless adapter from railink. i have it too and i installed this firmwire that was posted here, but it doesnt work. it finds the adapter but cant find any network or connect to any.... somebody have any ide how to get RT5370 to work with Dm500 hd open pli image?
|
Top
|
|
|
|
|
#1941 - 07/05/15 08:08 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
If you install OpenPLi from Jole, you will be able to run the RT5370 (without the need to install any driver, as it's already pre-installed), but you will need to remove from the drivers section the RT7777 file, the RT5370 will then work instead of the RT7777. On Jole911 image there is both, RT7777 and RT5370 pre-installed.
/lib/modules/2.6.18-7.4-dm500hd/kernel/drivers/net/wireless
Admin
_________________________
|
Top
|
|
|
|
|
#3618 - 11/12/15 04:04 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
Sometimes it works, for OpenPLi 4.0, Check this, opkg update
opkg install firmware-rtl8712u
opkg install kernel-module-r8712u
opkg install enigma2-plugin-systemplugins-wirelesslan
reboot Admin
_________________________
|
Top
|
|
|
|
|
#4423 - 12/27/15 08:05 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 12/27/15
Posts: 1
|
Hi,i have a TP-LINK TL-WN725N v2 (Realtek RTL8188EUS chip) and DM800se clone with Nemesis_2.6_SVN-112r3_dm800se-Japhar_SSL84J_April23 Have a driver for this usb wlan stick?
|
Top
|
|
|
|
|
#7419 - 04/04/16 02:42 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 04/04/16
Posts: 4
|
If someone can help! I have wifi dongle ID 148f:5370 Ralink Technology, Corp. ! I try to connect my DM800SE ferrari (Dream Elite v. 3.0, ssl87f oe 1.6) to my wifi router with no success! I have installed driver "rt5370sta_2.5_dm800se-mipsel.ipk" ! My wlan config menu appear and I scan and find my network but it won't connect. I try every possible config : open , DHCP on/off etc... but no luck!! Please help!!
|
Top
|
|
|
|
|
#7421 - 04/04/16 03:07 AM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
You have 3 options, - Set your network to WEP or to Open, and see if it works. - Move to OpenPli 4.0 IPTV for Japhar, as your dongle is supported fine. - You can also use Jole911 images, these generally work with RT5370 (in that case remove from the image the RT7777 driver in /lib/modules)... or get an RT7777 from http://www.japhar.com/japhar/ that works on this image for example : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=1224#Post1224Admin
_________________________
|
Top
|
|
|
|
|
#7429 - 04/04/16 04:23 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 04/04/16
Posts: 4
|
Thanks to admin for suggestions!!
|
Top
|
|
|
|
|
#7430 - 04/04/16 04:48 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: chikkara]
|
stranger
Registered: 04/04/16
Posts: 4
|
Just a question. Can I move to Open pli 4.0 with my old ferrari sim and louder ssl87f or I have to replace the sim with Japhar sim??
|
Top
|
|
|
|
|
#7435 - 04/04/16 08:29 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/22/10
Posts: 2639
|
You need to upgrade your box to the Japhar Sim, removing the old Ferrari that is no more supported, by the new Japhar Sim you can find for members only here, http://www.japhar.com/japhar/Have a nice day ! TS
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
Top
|
|
|
|
|
#9411 - 08/18/16 09:21 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 11/13/13
Posts: 2
|
Hi
I am trying to use D-Link DWA-110, a WLAN USB with Ralink RT73 chip in cvs+gp3 (OE2.0) image, but I've never been successful.
First, I updated all the plugins in "Manage Extensions" section and then I installed the "wlan-rt73_1.0-r6_dm800.ipk" file, by using the file browser. After that I cold booted my Dreambox DM800 HD PVR. I was waiting to see the orange LED on USB WLAN during the boot process, but nothing happened! Image booted up, and when I went to the Network section, there was no sign of any WLAN option!
I'm not an expert in linux based programming so please help me in a way that I can do it by myself.
Thanks.
My info:
root@dm800:/var/volatile/tmp# lsusb Bus 001 Device 002: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter
root@dm800:/var/volatile/tmp# uname -a Linux dm800 2.6.18-7.4-dm800 #1 Tue Jan 7 22:28:24 CET 2014 7401c0 GNU/Linux
root@dm800:/var/volatile/tmp# cat /proc/bus/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3c07 Rev= 0.01 S: Manufacturer=Ralink S: Product=802.11 bg WLAN C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
|
Top
|
|
|
|
|
#9412 - 08/18/16 09:32 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9886
|
The most important is that a driver needs to be compiled for the image you are using. So when you choose an image, be sure that the devices you want to connect if they need drivers, are supported and available for the image you install from the feeds. This is the best tip we can give, as without that you are mostly sure to never be able to install a driver/hardware into your box/image. Driver should be the RT73, as you can read below. https://wikidevi.com/wiki/D-Link_DWA-110_rev_A1Admin
_________________________
|
Top
|
|
|
|
|
#9414 - 08/18/16 11:26 PM
Re: RT2570, RT2870, RT3070, RT3572, RT73, ZD1211b Wifi
[Re: Admin]
|
stranger
Registered: 11/13/13
Posts: 2
|
nothing find The most important is that a driver needs to be compiled for the image you are using. So when you choose an image, be sure that the devices you want to connect if they need drivers, are supported and available for the image you install from the feeds. This is the best tip we can give, as without that you are mostly sure to never be able to install a driver/hardware into your box/image. Driver should be the RT73, as you can read below. https://wikidevi.com/wiki/D-Link_DWA-110_rev_A1Admin
|
Top
|
|
|
|
|
|
|