Hi Guys,
just a quick Q.... been playing around with this "OpenPli4 v.22 with JapharSIM" on my DM800se everything is going smooth after many days of re-Flashing and Greenscreens even two "RO CA Errors" using the JapharFlasher and the Yassinow "Bad Sector" Repair Tool, I got the Box working again.!
For a few days now I am trying to change the Winter Bootlogo and Radio both .mvi files.
I have used the "DreamLogo Generator" and managed to change the First Boologo.mvi using the on-Board FTP, but cannot change the Bootlogo_wait.mvi or Radio.mvi..!
Can anyone please tell me the "PFAD" where to put these two Files in this image.?
Thanks

Does these files are in /usr/share ? or /usr/share/enigma2 ?

Admin

@Admin,
Yes.. they are there, here are screenshos of both Pfads
1. usr/share - Bootlog.mvi with Att 644 in upper Caps.
2. usr/share/enigma2 - radio.mvi with Att 644 lower Caps

Should they be in Lower or Upper caps.?
Is the Att correct.?
Thanks

Generally all lower caps, but do them exactly as they are in the image where you try to modify them.

Admin

@Admin,
thanks, will try it out again and see if it works.
Cheers

Hi Guys,
I have found these two Tools for converting ANY picture (1280*720) or (1920*1080) of your choice, as long as it is a ".jpg file >>> to >>> .mvi" and use in your Boxes as bootlogo.mvi, bootlogo_wait, backdrop.mvi, reboot.mvi, switchoff.mvi and shutdown.mvi..etc usually (usr/share)

You can also take ANY picture (1280*720) or (1920*1080)of your choice to make your own "radio.mvi screenlogo".
But this one has to be Installed manually into the correct Folder..(usr/share/enigma2)
Does NOT work with the Tools.

ALL pictures MUST be in Format (1280*720) or (1920*1080) for conversion.!
You MUST have .NET Framework v.4 installed for this to work.!

The Xorion Converted ".mvi" files are then stored in the same folder where you Set-Up and Launched the Generator Tool from in "e2_Logo"..!!!

You can if you wish Fill out the IP of your Box:.
user: root and password: dreambox
(if error shows.. try again.. without user and pass filled in).!!
and FTP straight into Box ..that's your choice.!
This way it goes into the correct Folder NO mistakes.!
BUT you can send also manually up to you.!

Always Check first in your Boxes and images which "pfad" stores which Logo..and its Attribute... keep it same as original.!
Normally it would be " usr/share " and / or " usr/share/enigma2 "..! Att 644 or 755.

Should auto Transfer NOT work for some reason sending manually is another option for ALL Logos.!

Admin may correct, if I have made a mistake here.
Cheers

Thank you !

Admin

UPDATE
********
for Post above,
If you are having problems loading the "radio.mvi" here is a Tip.
The "radio.mvi" needs to be in usr/share/enigma2 called "radio.mvi" using the Xorion Tool place a Picture in ANY of the Boxes...lets say the "Reboot Box" click Convert but don’t send it.
Now it will/should have saved this created new "mvi" file in the Folder "e2_Logo" it will/should be called "reboot.mvi" now.
Rename it "radio.mvi" and FTP it to "usr/share/enigma2".

If it does NOT ask to Replace the "radio.mvi" thats inside already its OK leave it to finish the FTP Transfer.
The File size should be about 196.6 KB and have Att 644 with the date of Transfer.
Now if you see two "radio.mvi" files just delete the old one manually.
Restart Enigma and check the Radio Screen...you will see your new Picture/Logo..Enjoy
Cheers