I have sim 2.10 with SSL84D I have tried to flash SSL84J with firefox 3.6.3 and I get 100 percent reboot. i'v tried with japhar flasher and every other way I know of. Can someone point me in the direction I need to go. I'm trying to install japhar sim. Thanks

Did you done as explained in the tutorial ? Do exactly as explained.

Tutorial : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=11286#Post11286

If you have the old Sim in the box, do you have any error ?

The important is to keep the old sim in the box, Flash the ALLSIM SSL then turn off the box and then insert the Japhar Sim. Then it will work. Also check if you have the correct sim for your box, for example that you didn't ordered a DM800HDpvr (Frontpanel Black/White Screen) Sim and your box is a DM800HDse (Frontpanel Color Screen)...

Admin

P.S.: We verified and you ordered a DM800HDse (v1) sim.

yes ive done exactly like tutorial said. Would dual yuner have anything to do with it? also box says BIOS no ca found.
I do have the correct sim.

If you have NO CA FOUND message it means you have loaded an SSL/Image that is not compatible with the sim card in the box.

So as explained in the tutorial, you have to do :

- Flash the SSL ALLSIM.
- Turn off box
- Replace the old sim by the Japhar
- Turn on the box
- Flash a Japhar image

At what we know, you have a DM800HDse V1 box, so flash images from here only for now,

http://www.ourdreambox.com/ubbthreads.php?ubb=postlist&Board=48&page=1

And use the ALLSIM from here, http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=290#Post290

Please also tell us what you done and exactly which files (give us the links) you used.

Try to restore the box on a state where you don't have NO CA ERROR, for example inserting back the old sim, does it removes that error ? If yes, then you can do as explained in the tutorial.

If it doesn't change anything, and you have the same with the Japhar Sim, please tell us which image/software you loaded that gave you that error.

A simple way to flash the ALLSIM is the JapharFlasher with the USB Cable + RJ45 Cable. Then once you have it, you "recovered the box" and you can do anything you want.

Admin

P.S.: To set the box in download/image/Mode, NEVER use the back push button, that just loads the SSL from Sim2... that naturally is NOT compatible with the Japhar or any other sim.