Thank you fairbird .
I have tested , On my DM800HD (Clone) with supersim openpli 4.0 and then install BA V11.3e work fine ..., that version is modified, because i have test many version of BA but that only work.
Then i want install DEblackhole and italysat in usb stick , i must copy nfi image in /media/mb_Media/ba and install from BA plug in addon ?

Did you read first post ?!
Please read it (Every things there)

and best version is last one 11.3f ...

Thank you fairbird with your BarryAllen i have:

1) Openpli 4.0 in flash
2) On usb -- blackhole 2.1.7 ,Italysat special edition, DEblackhole , OpenATV 5.0,
3) And that's ok
Thanks a lot.

On usb 2gb , the image is very fast .

Happy to hear that

Dreambox 800hd oe 1.6 DE-OpenBlackHole (Toysoft) image , BarryAllen show in boot , but no in plugins got this message :
BarryAllen (__init__() got an unexpected keyword argument " needs restart

Try version 8.9

I installed 8.9 in first post but this message come out

1-Download compress file from Attach
2-Extract it
3-Send file to path /usr/lib/python/enigma2/Plugins
4-Do restart enigma2

P.s:I'm stopped to support old OE1.6 just help you for this image to My friend (Toysoft)

Thank you , but dont work ,same message .
I will try to do something .

Work with me on last version also 11.3f ..
Test it now and works just fine ...
As i said in this path exactly send file after extract it
/usr/lib/python/enigma2/Plugins

Thank you Fairbird, it's always very very appreciated that you support my DE-OpenBlackHole 1.4 image that I really like a lot ;o)

Merci !

TS

Work !!!
/usr/lib/enigma2/python/Plugins

Thank you again .

So, after an evening of messing around with this version of BarryAllen, let me tell you my experience:

1. Tried to install according to instructions given here: FAILED! USB stick could not be formatted to ext3 during installation. (Was formatted with HP Tool before installation, NO quickformat)



2. Tried another USB stick, same result.

3. Used gparted to format stick with ext3 ... SUCCESS! BarryAllen installed correctly but gave a (minor) error



4. Entered BA setup, checked some things, read the manual provided here. Then made a backup of my OS in flash and tried to upload some *.nfi images onto my box. FAILED!

5. Did some research and realized that BA does a symlink from MB_Images in root folder to /media/hdd/backup. This is where the nfi files SHOULD go. UNfortunately, my hard drive is not mounted there, so the files would have gone to flash memory. THAT CAN'T WORK!

6. Symlink from /MB_Images to /media/MY HARD DRIVE/backup and it worked ... I THOUGHT!

7. Copied nfi files from my computer to the folder on the box, WORKED. Entered BA setup and wanted to get the nfi files extracted ... GREEN SCREEN!

8. Green screen gave an OS error because a folder named /ba/ba/MB_Images was not there ... realized that the code pointed to the wrong folder ... should be /MB_Images ... created another symlink ... worked

9. After the nfi files were extracted, I wanted to test BA and rebooted the box ... then, it got stuck at the vmlinux.bz (I think that's the name of the file) ... so at the VERY beginning of the boot process.

10. Wasted hours of testing and bugfixing, just to find out that BA 11.x does not work on DB800HD SE Clone with Japhar SIM and had to restore an old image on the box.

11. Thanks!

Very good analysis of the BA, I personally don't use it as there is many many restrictions in using it, that most of time get it failing. I use only 1 image on my boxes, the DE-OpenBlackHole 1.4 where I don't need IPTV, and the OpenPli 4.0 IPTV from MastaG in the other boxes that works flawlessly, but just be careful of the Flash available, as if you have less than 1 Mb available the box will behave very strangely !

TS

@Murdock0815
Last Version of BA 11.3 doesn't work smoothly with DM800se + V2 , 500HD + V2
Because file (Nfidumo) to extract images was beta and expired now ...
Read in first about it ... You need to change files to Nfidumo 0.4.0 ..
And after extract any image check it out if success extract or not from
/ba/ba/name of image
see inside folder (Is it all directory available ?!)
Then you can boot from that extract image ...

I've tried Barryallen on dm800se a8p and on dm800se sim2.10 boxes. I was able to get them work ok, but there were always a problem on them: after a while I got my usb pen filesystem corrupted and I had it to repair with linux filesystem repair tools. This happens always to me, just a metter of time.
I' ve tried different usb pen different sizes, ext3, ext4 formatting but no success. So I decide to use ItalyBoot multiboot. I had to put Italysat image in flash, but since that I could install all images in multiboot with no problem.
Only issue is that you have mount manually your usb device in the multiboot image or add it in the startup sequence in init.d

Hi

Patched BarryAllen working great on SatgreamGr and other PLi based images on DM8000 original sim.
It always install first hand and works after reboot flawless

I have a problem with my 1.5Tb WD internal hdd.

After install hdd is being locked by a process (samba timeshifting....etc - I can not figure out what) and will not be accessible for root image or any multiboot ones.

I fooled my root image to take a second USB stick as HDD and mounted my primary drive as hdd2. It worked and was still there after reboot.
However in multiboot images will disappear and the only available is BA drive.

Can you advise where I can look and check what process is locking my drive?

I confirm that main hdd drive mount disappear next boot after BA gets installed, I backup my root image and tried 5 times. PLi Device Manager or Mount Manager are not allowed to modify it.

Any tip or advise will be appreciated.
Thanks

With latest barry allen, i cannot select in boot menu. Tried all 4 options in RC. All 4 masks.
How can i get it fixed?

Flash: Openpli 4.1 latest from Japhar.
BA: Peterpan, Openpli, OpenblackHole.

Thanks!

i have an temporary solution. I boot into the image and use the plugin to boot into another image.

I tried with both versions and after choosing the image that is on the pendrive (last BH) it starts but stays on the booting screen.

Try to install the Japhar Image as the Main image, then the other images on the USB Memory Stick.

Admin

I installed the last openpli and stopped again at boot.

Did you installed a Japhar Image as the main image into the Flash of the box ? And then the other images into the External USB Stick ?

TS