How to flash your VU+ Duo with USB stick ?

Flashing your VU+ Duo With A USB Stick

It is very simple to flash your VU+ Duo receiver using an USB stick. Just follow these instructions:

1. Format your USB stick with a FAT32 file system
2. Create a folder "vuplus" in the root directory of the USB disk (note: this HAS to be lower case!)
3. Create a folder "duo" in the "vuplus" directory you've just created (again, this HAS to be lower case!)
4. Download the USB image of your choice (this is an image specific for USB flashing, you can not use the standard .nfi file!)
5. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool
6. Copy the three files that are in the zip archive to the "duo" directory on the USB stick
7. Switch your VU+ Duo off (power-off, not stand-by!)
8. Insert the prepared USB stick into the front of your VU+ Duo receiver
9. Switch your VU+ Duo on
10. Follow the installation instructions on the screen