Welcome to Our Dreambox World - Japhar Sim - SuperSim
Forum Stats
9344 Members
225 Forums
6756 Topics
18580 Posts

Max Online: 1031 @ 09/30/17 03:50 AM
Newest Members
cmax091, zarpa92, Julio Silva, colpal, Tadeusz Lach
9343 Registered Users
Who's Online
15 registered (Admin, WarLord, Toysoft, Ro1961, JAMICARDOSO, Jerome, Smokey, sail47, 544, serpicul, kyk65, waiwit, stanley__sk, rayyen, sonnyRed), 538 Guests and 181 Spiders online.
Key: Admin, Global Mod, Mod
Shout Box

Top Posters
Admin 8192
Toysoft 2075
fairbird 709
satsedhu 593
ludo19 422
Top Posters (30 Days)
Admin 101
satsedhu 42
FedericoDY 15
Nradd 11
Smokey 10
November
M Tu W Th F Sa Su
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30
Topic Options
#19641 - 10/17/19 09:28 PM Broadcom BCM7424 VU+ Duo2 white LED
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
Hello I'm a beginner but have read a lot about it,

My VU+ DUO2 only shows a white LED, so I want to flash the bootloader again. But for my chip k9k8go8uod I Need a BCM7424 but I can't find anywhere. I would also like to know which Jtag port I can use, the P703, P401 or P301? I bought the Cypress CY7C68013A EZ-USB FX2LP on eBay and it should arrive in a few days.

Can anyone help me? I'm grateful for any advice.

Top
#19644 - 10/18/19 12:00 AM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
As far as I known is there no bbs software for these BCM7424 cpu, as also no nand flash script.
Jtag pins question, I think, the four pins P301

Issue, white LED
Be sure that it failed to read from the usb ports, use a usb stick with an activity led, or monitor it with the rs232 terminal programs as putty to see if it"s doing an attempt to read from a usb stick.
You could also try to add the force.update to the usb files.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top
#19652 - 10/18/19 11:18 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Johnny_B]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
Thank you for the quick reply.

The receiver is dead. Nothing is shown on the display, except for the white LED.
The USB stick is also not getting read at the USB port.
With Putty no movement is indicated at the rs232 port.
I found a k9k8go8uod.xml file for the Vu+ Ultimo and inserted it into the BCM7413 software.
I am just waiting for my hardware CY7C68013A from China to arrive, then I'll start some tries.

I'm grateful for any help.

Top
#19653 - 10/19/19 01:18 AM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
Yeah well I have so my doubts if this BCM7413 will connect to the BCM7424, but it's worth to try.
Or maybe the BCM7429 will make a connection.

But did you also have tried to hold the front push button, and switching the box on.
It must be fully turned off, and at least for a few minutes before you can try it.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top
#19655 - 10/19/19 02:59 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Johnny_B]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
I can only try this when I have the Cypress CY7C68013A EZ-USB FX2LP.

Where can I get the BCM7429?

I have already tried pressing the front button whilst turning the device on.

Top
#19656 - 10/19/19 04:44 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
You can download it here, it an topic for the Xtrend ET8500 which has this bcm7429 cpu.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top
#19659 - 10/19/19 08:36 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Johnny_B]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
Thanks, I'll test it soon. I was able to install "Bcm97429CBSetup.msi" but "BBS3 - setup.exe" is not installable.

Top
#19776 - 10/28/19 07:50 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
I re-installed the software BBS 3. It is running now. The delivery from China doesn't seem to be coming yet.
Now I also ordered the TL866 Plus Programmer, unfortunately I will have to wait for a few more weeks.
In the meantime I measured the voltage on the P301 port, from left to right 3.3V, 3.3V, 3.3V and GND would this port be suitable for Jtag?

Top
#19779 - 10/29/19 09:33 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
Actually, when you measure it precisely then it should be 3.3v, 3.2v, 3.2v, Gnd.
Thus, Vcc, Scl, Sda, Gnd
However since the cypress board already has his power from the usb, you only need to connect the Sda, Scl, Gnd, and yes it's based on the amount of pins, and measurements suitable for jtag.

TL866 Plus Programmer, good choice due the clone option and also one of my favorites.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top
#19869 - 11/07/19 10:59 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Johnny_B]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
Today I recieved the TL866II Plus Programmer, could you help me with the pin assignment? :

TL866II Plus----------------VU+ Duo2 Board P301

1. VPP- MCLR
2. VCC +5V
3. GND------------------------------ 4. GND
4. PGD - ICSPDAT ----------------- 3. SDA
5. PGC - ICSPCLK ----------------- 2. SCL
6. NC.

Is that right?

Top
#19870 - 11/07/19 11:20 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
As far as I know, you have it now about the P703 which is a 6 pins ICPS connector and I have no information about that.

As for the TL866II Plus, this has a ICPS port but you need to take a look to the pinout of it.
In any case, the duo seems to have also a another port, the P401
which is a jtag connector but also by this, you need to check at least the vcc and ground pins before you do an attempt to connect it because the connections are often not basic.
But it has as far as I know, there is no use to do that.

The one I gave was the P301 four pins I2C (Jtag) connector.
This is placed between the U807/U804 and can be used with the Cypress board to do an attempt to fix the boot loader of the box.

_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top
#19880 - 11/08/19 06:48 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Johnny_B]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
The schema I have given above are the connections from the TL866II Plus ICSP to the port P301. Would that be possible?


Attachments
TL866II PLUS003.jpg



Top
#19895 - 11/09/19 10:40 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
I have connected the P301 to the ICSP port, but if I enter the IC "Samsung chip K9K8G08U0D" in the software I can not select an ICSP port. What other setting options do I have?

Top
#19900 - 11/10/19 07:00 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
The ICPS post of the programmer is not usable for an I2C port.
This programmer port is only usable for ICPS connections and to create a connection, the programmer must have the correct part in the list to work with it.
And I have no idea what can be accessed with the duo2 and the ICPS port, but I think it's used for accessing the cpu, or debugging from it, in any case (I think) not to access the Nand flash chip.

In any case, as far as I known, you can not use this programmer to access the nand flash chip by this method.
You should remove the nand flash chip, and place it directly into the programmer to get access to it.

For the I2C port, you need a I2C programmer, as for example the Cypress board.
This board you can use with the bbs software, and when you have the correct bbs xml script to access the nand chip you should be able to access the nand flash chip.
With the bbs software, you should be able to upload the boot loader (if you have it for the duo2) to bring the box into the state as that you be able to upload an image file on the regulair way, by the usb.

If/When you can get a bbs connection, and if/when you are be able to get contact to the nand flash chip, but you get an error.
Then there may some tricks you could try to complete it.
When that not helps, then you could consider to remove the nand flash chip, and to try to fix it with the programmer, or even to program the nand flash chip with a backup from another duo2 box.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top
#19905 - 11/11/19 09:19 PM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Johnny_B]
Giovanni001 Offline
stranger

Registered: 09/30/19
Posts: 10
Yes you are right, I will order the Cypress board again because I did not receive the first order. Would the Cypress board with 2 jumpers work as well?

Top
#19916 - Yesterday at 12:54 AM Re: Broadcom BCM7424 VU+ Duo2 white LED [Re: Giovanni001]
Johnny_B Offline
VIPF Japhar
member

Registered: 03/09/15
Posts: 181
Loc: Netherlands
The two jumper version should be working fine as you can see here connected with a vu+ solo2.
_________________________
Doing nothing leads to nothing.

------------- Please note, for technical support -------------
Will be given here, or on the jb8a8f8 forum and I prefer it in English.
Johnny B.

https://jb8a8f8.com
https://jb8a8f8.nl


Top



Moderator:  storm_breaker 
New Topics
Jtag from old Tuner
by dim
11/12/19 06:35 PM
In arrivo anche il nuovo canale 4K Universe
by Admin
11/12/19 04:44 PM
Iliad boss commits €1.4B to share buyback
by Admin
11/12/19 04:13 PM
Cambiano ancora i televisori (Italia)
by Admin
11/12/19 01:19 PM
Dish Network beefs up mobile team with industry...
by Admin
11/07/19 03:57 PM
Trattativa Mediaset Vivendi sul via libera alla...
by Admin
11/07/19 12:47 PM
Formuler F4 EPGImport
by Smokey
11/05/19 04:28 PM
Flashing Dreambox
by Smokey
11/03/19 08:37 PM
Vivendi lancerait un bouquet satellite en Ukraine
by Admin
11/03/19 03:10 AM
HD+ veut récupérer les abonnés de Diveo
by Admin
11/03/19 03:07 AM
DM500HD and Win7
by Sewi2015
11/03/19 12:59 AM
@@OpenTSimage-6.X_DM
520@@

by fairbird
11/02/19 04:17 AM