Welcome to Our Dreambox World - Japhar Sim - SuperSim
Forum Stats
12422 Members
237 Forums
7730 Topics
23825 Posts

Max Online: 4756 @ 02/20/20 11:12 PM
Newest Members
vu+vu, Ramaka, MECEDES, DrNaf, robbenvandjik
12421 Registered Users
Who's Online
6 registered (Admin, Toysoft, talat1000, hecruze, bitgames, Smokey), 977 Guests and 147 Spiders online.
Key: Admin, Global Mod, Mod
Shout Box

Top Posters
Admin 9885
Toysoft 2638
satsedhu 1713
fairbird 765
ludo19 442
Top Posters (30 Days)
Admin 12
Rome125 7
Toysoft 5
Sasillo 3
Hum@xel 1
April
M Tu W Th F Sa Su
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30
Topic Options
#17922 - 01/04/19 12:27 AM Rescue Mode Problem on DM9x0UHD
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9885
Rescue Mode Problem on DM9x0UHD

For rescue DM900 use usb cable and putty (serial port, 115200 bps 8N1, for the CFE stage, it's 9600 bps).

Start receiver and push ctrl+C to enter in cfe mode. Use usb stick for rescue file downloaded from internet.

Code:
ifconfig eth0 -auto
show devices
dir usbdisk0
boot usbdisk0:zImage-rescue-xxxxx


Then your receiver get in rescue mode and you can flash firmware (any tar.gz, tar.xz etc image file).

Check also : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15557

- Rescue files
DM900UHD (eg : zImage-rescue-3.14-r0-dm900-20181002.bin) : http://www.dreamboxupdate.com/opendreambox/2.5/experimental/images/dm900/

DM920UHD (eg : zImage-rescue-3.14-r0-dm920-20181127.bin) : http://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm920/index.php


TIP :

- If you have a login with username/pass, do the way explained on the post below,
http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=15557

- If you have NO login with username/pass requested (and no access via IP)... then you need to go the way of this post.

- Repair white web rescue page, "Content-Type: text/html;charset=utf-8" (Removal of the FrontPanel Screen OLED)
https://jb8a8f8.com/support/index.php?th....615/#post-5523
_________________________

Top
#19889 - 11/09/19 04:03 PM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
angeloblu Offline
stranger

Registered: 11/08/19
Posts: 4
I can't get it to go into a rescue mode attached cable with putty I send commands but nothing can help me thanks

Top
#19891 - 11/09/19 04:14 PM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9885
Ciao !

Hai un problema di partizioni ? Se si, forse i dati sotto potrebbero aiutarti a risolvere.

Vai in "rescue mode", se non ci sei gia molto probabilmente.

Code:
echo "rescue" >> /proc/stb/fp/boot_mode && reboot


Controlla se hai le partizioni come sul box funzionate sotto (e un DM900UHD),

Quote:
opendreambox 2.5.0 dm900

>>> Your Dreambox has booted into RESCUE MODE.
>>> Please log in as user 'root' (no password required),
>>> then run 'help' to get further information.

dm900 login: root
root@dm900:~# fdisk -lu

Disk /dev/mtdblock0: 2 MB, 2097152 bytes
255 heads, 63 sectors/track, 0 cylinders, total 4096 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock1: 0 MB, 131072 bytes
255 heads, 63 sectors/track, 0 cylinders, total 256 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mtdblock1 doesn't contain a valid partition table

Disk /dev/mtdblock2: 0 MB, 131072 bytes
255 heads, 63 sectors/track, 0 cylinders, total 256 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 14 MB, 14417920 bytes
255 heads, 63 sectors/track, 1 cylinders, total 28160 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/mtdblock4: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mtdblock4 doesn't contain a valid partition table
Found valid GPT with protective MBR; using GPT

Disk /dev/mmcblk0: 7634944 sectors, 3728M
Logical sector size: 512
Disk identifier (GUID): 30f082cc-2877-4689-9b2b-e1812454a613
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7634910

Number Start (sector) End (sector) Size Code Name
1 2048 65535 31.0M 0700 kernel
2 65536 2097151 992M 0700 rootfs
3 2097152 7634910 2703M 0700 data

Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mmcblk0boot1 doesn't contain a valid partition table

Disk /dev/mmcblk0boot0: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders, total 8192 sectors
Units = sectors of 1 * 512 = 512 bytes

Disk /dev/mmcblk0boot0 doesn't contain a valid partition table


Tienici informati,

Admin

DM920UHD :

Quote:
root@dm920:~# fdisk -lu /dev/mmcblk0
Found valid GPT with protective MBR; using GPT
Disk /dev/mmcblk0: 15269888 sectors, 3360M
Logical sector size: 512
Disk identifier (GUID): a157dc9b-d004-44e6-a25a-9c0d96d709f6
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 15269854
Number Start (sector) End (sector) Size Code Name
1 2048 65535 31.0M 0700 kernel
2 65536 4194303 2016M 0700 rootfs
3 4194304 15269854 5407M 0700 data


Perhaps you could restore your GPT partitions this way... from rescue partition.

Quote:
sgdisk /dev/mmcblk0 -z -n 1:2048:65535 -c 1:kernel -t 1:8301 -n 2:65536:4194303 -c 2:rootfs -t 2:8307 -n 3:4194304: -c 3:data -t 3:8300
_________________________

Top
#19892 - 11/09/19 05:08 PM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
angeloblu Offline
stranger

Registered: 11/08/19
Posts: 4
allora ti spiego a causa temporale non si accende piu in pratica resta con led rosso acceso ho provato con il cavetto
ma non riesco a collegarmi ,provato con putty con il comandi che sono postati sopra ma niente adesso ho staccato domani provero con i comandi che hai messo vediamo puoi essere piu preciso con la procedura passo passo grazie il dream e un 900
uhd grazie ancora

Top
#19893 - 11/09/19 05:12 PM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9885
Devi lanciare il Putty in modalita seriale con velocita da 115200 bps, con il cavo collegato dalla porta Service del box al PC. Quando accendi il box dovrebbe darti informazioni sul terminale putty che potra aiutarti a capire cosa non va.

Gia con quello si potra capire qualche cosa. Questo fatto se si riesce, dovresti entrare nella console del rescue e da li potere fare i vari commandi fdisk per vedere come e la tua Flash. Poi da quello si potra vedere cosa fare.

Admin
_________________________

Top
#19901 - 11/11/19 10:31 AM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
angeloblu Offline
stranger

Registered: 11/08/19
Posts: 4
niente fatto la procedura con putty ma su putty nessuna informazioni non so piu cosa fare se c'è qualcuno in zona lombardia che mi puo dare una mano grazie

Top
#19902 - 11/11/19 12:02 PM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9885
Istalla Teamviewer, e fai il boot del box, a distanza si potrebbe provare con il tuo PC poi ad entrare sul box e vedere.

Admin
_________________________

Top
#19907 - 11/11/19 11:02 PM Re: Rescue Mode Problem on DM9x0UHD [Re: Admin]
angeloblu Offline
stranger

Registered: 11/08/19
Posts: 4
non ho capito come faccio con teamviewer a entrare nel box ?

Top
#19908 - 11/11/19 11:13 PM Re: Rescue Mode Problem on DM9x0UHD [Re: angeloblu]
Admin Online   content
Japhar Member
Carpal Tunnel

Registered: 10/19/10
Posts: 9885
Tu istalli e mi mandi via PM il user/pin e cosi posso guardare a distanza, per vedere se posso sistemare.

Originally Posted By: angeloblu
non ho capito come faccio con teamviewer a entrare nel box ?


Admin

DM900UHD :

Quote:
opendreambox 2.5.0 dm900

>>> Your Dreambox has booted into RESCUE MODE.
>>> Please log in as user 'root' (no password required),
>>> then run 'help' to get further information.

dm900 login: root
root@dm900:~# fdisk -lu /dev/mmcblk0
Found valid GPT with protective MBR; using GPT

Disk /dev/mmcblk0: 7634944 sectors, 3728M
Logical sector size: 512
Disk identifier (GUID): 30f082cc-2877-4689-9b2b-e1812454a613
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7634910

Number Start (sector) End (sector) Size Code Name
1 2048 65535 31.0M 0700 kernel
2 65536 2097151 992M 0700 rootfs
3 2097152 7634910 2703M 0700 data


Should be...
Quote:
sgdisk /dev/mmcblk0 -z -n 1:2048:65535 -c 1:kernel -t 1:8301 -n 2:65536:2097151 -c 2:rootfs -t 2:8307 -n 3:2097152: -c 3:data -t 3:8300
_________________________

Top



Moderator:  Emosim 
New Topics
Dish receives financing offers from credit compani
by Admin
04/12/24 02:33 PM
USB on your DM500HD v1/v2 box...
by Toysoft
04/12/24 12:24 AM
dm500hdv2 original
by Rome125
04/08/24 08:23 PM
Telecom Italia sticks up for NetCo sale
by Admin
04/08/24 02:44 PM
Iliad founder eyes major Ukraine play as deal near
by Admin
04/08/24 02:43 PM
DM500HD : OpenPLi 8.xStar fully installed...
by Admin
04/03/24 02:08 AM
DM800HDse : OpenPLi 8.xStar fully installed...
by Admin
04/03/24 02:08 AM
ERROR after flashing OpenPLi 8.X star 20230624
by Sasillo
03/25/24 06:27 PM
Fatal: Target device '/dev/dreambox-rootf
s' is not

by Admin
03/22/24 02:45 PM
Google voice USA
by Bobo360
01/26/24 04:32 PM
Satellites.xml for Enigma² by Hum@xel
by Hum@xel
02/02/19 04:37 PM