12499 Members
237 Forums
7798 Topics
23950 Posts
Max Online: 9115 @ 08/24/24 07:30 PM
|
|
|
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
|
|
|
|
|
|
|
|
|
#12103 - 05/10/17 11:10 PM
Re: Replacement of Flash chip on Vu+ Solo²
[Re: Admin]
|
stranger
Registered: 05/10/17
Posts: 2
|
ineed to replace my Flash chip on Solo2
i need this Flash chip Where did you buy it?
|
|
Top
|
|
|
|
|
|
#12118 - 05/12/17 09:42 AM
Re: Replacement of Flash chip on Vu+ Solo²
[Re: nabilosse]
|
VIPF Japhar
enthusiast
Registered: 03/08/15
Posts: 218
Loc: Netherlands
|
The nand flash chip should only be replaced if it is no longer can be accessed by jtag (I2C) or has to many bad sectors.
An empty new flash chip can be found on the internet as Aliexpress or Ebay.
However, you still need to prepare the nand flash chip by Jtag in order to get it to work with the usb flash method.
And because there are several type solo2 motherboards from different fabrics you need to know precisely which jtag method you must preform to get it to work.
For example, an original solo2 bin file will mostly not work on a clone board.
For that you need to upload the correct boot loader which is suitable for your type motherboard.
However, if you have a original solo2 box, then it should not be a problem.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there.. 
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index