Devi seguire le istruzioni qua,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=3377#Post3377

Funziona 100%, se non va vuole dire che fai un errore da qualche parte.

TS

rapaceto @ right now darkened sky so dark only see everything in DTT IPTV perfect and therefore useless to try

Quale Sim hai ?

Se hai una Sim Japhar NC3 SuperSim3 disponibile su http://www.japhar.com/japhar/, si e compatibile con la nostra sim che fa tutte le imagini Japhar (MastaG OpenPLi 4.0 IPTV), come anche le Ferrari e anche tutte le Sim2 (2.01/2.10).

Se hai una sim di un altro team per il tuo DM800HD, buttala ;o), e metti la SuperSim3 ! ;o)))

I drivers A867 come spiegato, in 3 secondi sono istallati e funzionano 100%... ho piu di 300 canali DVB-T sul mio DM800HD, piu di 4000 canali DVB-S/S2, e 1000 canali IPTV... tutto sul DM800HD con Sim Japhar NC3.

Admin

Ho la sim presente nel clone da quando l'ho comprato ( non saprei dirti quale ), credo a questo punto che sia un problema di incompatibilita' di SIM, compra la JAPHAR e credo di risolvere tutti i problemi.

grazie per il supporto.

Per certo si, se hai Sim Japhar, tutte le imagini Japhar vanno incluso la OpenPLi 4.0 con IPTV e... i drivers,

TS

i don't now what is my problem. I can not in any way to install the ipk. Via telnet after copy in
/var/tmp/ (ipkg install /all ) negative. Via japhar addon menager 5.2 -- driver-for--800hd- , i recive error "incompatible version for this architecture"... sigh.

Yes, did you tried the 4 commands ?

Admin

We added an auto-install procedure plugin for the A867 that works on all DM originals/clones with Japhar sim with OpenPli. The box will run the plugin and auto-install the A867 drivers and reboot TWICE, then it will be installed. The A867 must be on the USB Port when doing this.

Enjoy, and Happy new Year,

Admin

Remember ! That you need enough Flash space to have this installation working properly.

help for dtt avermedia a867 , i've tested only mode to install driverfor a 867 led nlu , but i've not win this battle on openlpli... help toysoft. iptv is very very fast.

Check the ipk auto-install on the JAM 5.2, it works for DM500HD, DM800HDse. But we don't have an A867 here to test on DM800HD.

Admin

Scuse me D2mac and Admin , i have install with d2mac method and the A867 run very well. thank you so much.
although it gave me error it install the same, and is necessary set 5v in decoder dvbt setting

You need to use OpenPLI 4.0 from MastaG ONLY ! As well as you need to properly do as described... if you have such error, it means you done or missed something, as if the file is not present it means you didn't copied it where you use it... etc... be sure you do things properly.

This is the reason why we setup 2 easy ways,

- Commands to send (4 commands)
- GUI install via the JAM 5.2 as explained

These 2 are working and are simple,

Good that finally you were successful, as explained it works and it's only a matter to do properly the installation as explained. Well done.

Admin

On original DM800SE with openpli 4.0 o.e.2.0, i have install 9035 driver from panell , and after i have install right driver with this command from telnet " opkg install kernel-module-dvb-usb-a867 " and reboot

can someone please build this
v4l-dvb-module-dvb-a867_2.6.18-7.4-dm800+20100904-r0_dm800.ipk

with gcc_4.6 for dm800
can you please point to the source too

Thanks/Grazie

See here,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=326#Post326

TS

On openpli 4.0 for original dm 800 se , i installed

v4l-dvb-module-dvb-usb_2.6.18-7.4-dm800se+20100904-r0_dm800se.ipk
v4l-dvb-module-dvb-a867_2.6.18-7.4-dm800se+20100904-r0_dm800se.ipk

but at reboot the yellow bar progress , stop at hal and i must do reflash the box.
What are the right driver for original box?

This should work and be enough in all cases and for all boxes,

Admin

For DM :


For VU+ :

un saluto Grandioso a Tutti Voi

funziona al 100x100

1000 Grazie ancora.

;o), Enjoy !

Admin