VU+ Solo : FERRARI OpenPLi 4.0 IPTV GStreamer 1.7.2 MastaG for FERRARI VU+ SOLO V3



- Gstreamer 1.7.2
The mp4 playback from remote urls has been fixed upstream so no more revert for that.
libsoup http-handler has been updated so also no revert for that as well
- New libsoup handler for http urls
- New winter logo
- More free space laugh
I've added a dirty hack that will upx compress the binary before package_write_ipk
We now have 2 to 3MB more free space (very nice, great success)
- New xvid/divx5 bitstream unpacker by mx3L, this should fix avi files with wrong fourcc
- The usual batch of dvbmediasink fixes by christophecvr and mx3L
- Wifi drivers have been refactored a bit, I don't auto-load the rt7777 anymore.

TS

MEGA : https://mega.nz/#!45hWwCgB!Kw2DD2ICO-rpiXOXCF52rQB5u1WU7uMQbhfXXaqUlUs

Hi this doesn't work on VU+ Solo Ferrari V2.0 ?

Hello !

It was built for Ferrari V3, but it is possible to replace the drivers to have it working for v2.

Admin

Hi How to replace driver ? Do you have some instruction ?

I will try to generate a V2 image for you guys ;o)

TS

VU+ Solo : FERRARI OpenPLi 4.0 IPTV GStreamer 1.7.2 MastaG for FERRARI VU+ SOLO V2



MEGA : https://mega.nz/#!B9gzVAyL!y6DybBi-9eLs4H3guPi_H7WKuiGjlrduCs6Pp1WtxzA

Super THXXXXXXXXXXXXX

Thank you so very much.

in this image work dtt avermedia a867 led blue?
Thanks

Yes, you just need to install the driver via the feeds,



Admin

pefect work on vu+ solo v2
thanks

OpenPLi 4.0 IPTV GStreamer 1.7.9 by MastaG Ferrari V3



Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray iso's by Taapat
- remote control's should now have their media-button working
- vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.

Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800. It's highly recommended to set it level 0

V15, with GStreamer 1.7.90 Final and CrossEPG Built-in !
MEGA : https://mega.nz/#!Y14zgCKD!QCkJbF2HoClteRtVi3jZohfbjnOpjWwF1OmtmIUfQwc

good morning, some good soul you can 'please explain how you change the feed? 'A year that I'm trying but failing help me there please? thank you.I'm trying to be able to install dtt blue LED

No one helps me? How to install the feed?

Forgive my ignorance on the subject, but when I go to install the ipk file that you posted I find myself with collectal error ... where am I wrong? thanks for your patience

You have to select the right ipk, for your box (VU+ Solo ?), and you need to install the usb one and the a867. See last posts on the topic, copy the 2 files in /tmp, then "opkg install *.ipk". It should be ok.

Admin

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)



Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...

VU+ Solo Ferrari V3 : https://mega.nz/#!5kp0TCJD!hugukO015QwEoz8g549TROImOex-PvVzSVSBWIWWL9o

OpenPLi 4.0 with Latest and Newest IPTV software (1200+ Channels preloaded !), ready for release now :



April 15th 2016 !

OpenPLi 4.0 IPTV GStreamer 1.9.0.1 by MastaG (v17)

Changes:

- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed

MEGA : https://mega.nz/#!Y4RTFQpI!_v8UbqT50Iy6enQ6GxmJeSExWYBZhiJGO3kU90JXjFY

Can this file be use with the solo Ferrari v2?

Install this v2 version and upgrade online,

http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=5843#Post5843

Admin

Thanks

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)



Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

VU+ Solo Ferrari V3 : https://mega.nz/#!whgxgRrQ!FPma5g5i2ZWO8p3Oh7fDjbBqcmiZg3aEJZxVVa8UgJk

Hello
work very good on my vu+ solo V3 ferrari, thanks !!
@+

Hi,I've installed this firmware for Vusolo (ferrari v2) its ok but in Softcam CCcam don't working, why?
in telnet i lauched CCcam -v and i received no error but no video
can you help me? Thanx in advanced

You have to install the Cam software from the JAM 5.2, as every image has it's own scripts. If you install by hand you need to do all properly, or use the ipk from the JAM 5.2. It works fine if you do it properly.

About the "no video" thing, all depends of your configuration, and if you have your subscription card on the slot... so I let you check what helps you with the CCcam.cfg as here we don't support it. We only support good working Linux Images based on Enigma2.

Admin