12427 Members
237 Forums
7732 Topics
23828 Posts
Max Online: 4756 @ 02/20/20 11:12 PM
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
|
29
|
30
|
|
|
|
|
|
|
|
|
#8163 - 05/01/16 02:16 PM
DM8000HD Tuner B Dead (Johnny ?)
|
VIP Japhar
newbie
Registered: 03/30/15
Posts: 20
Loc: Italia
|
I installed a second signal cable from the dish and I plugged the cable with the Dream on, I saw the spark that and now does not come out no signal .
Maybe you can fix , if the two tuners are managed by the same chip , and maybe the problem is perhaps only protection ( resistance) come in, which can be replaced.
What do you think about it?
Thank you and greetings.
|
|
Top
|
|
|
|
|
|
#8175 - 05/02/16 12:36 AM
Re: DM8000HD Tuner B Dead (Johnny ?)
[Re: Italo18]
|
VIPF Japhar
enthusiast
Registered: 03/09/15
Posts: 218
Loc: Netherlands
|
I do not really know what you want. Will you try to fix it yourself, or do you want me to look at it. In any case, it is difficult to say what it could be without some measurements. It may be limited to a diode, coil, or ic which has a reasonable chance to fix it. But it can also be a fault with the bcm4501, and it is difficult to replace, but so also difficult or impossible to obtain. Further information about it, you can find here. 8000hd-tuner-related-measurements.
_________________________
Doing nothing leads to nothing. ------------- Please note, for technical support ------------- Will be given here, or on the jb8a8f8 forum and I prefer it in English. Johnny B. Click on the banner if you like to go there.. 
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index