12439 Members
237 Forums
7735 Topics
23833 Posts
Max Online: 4756 @ 02/20/20 11:12 PM
|
|
|
9 registered (Admin, raffsif1234, marcopiu, Toysoft, cyberfact, ooclaf1950, x_wins, garpaz, bitgames),
1082
Guests and
216
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
|
|
#9987 - 10/31/16 06:23 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 07/31/15
Posts: 93
|
i found for mediaplayer....
i did not see it in menu...
it was hard afternon c;))) thanks for help, say hello to toysoft..
by kika
|
Top
|
|
|
|
|
#9991 - 11/01/16 11:09 AM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 07/31/15
Posts: 93
|
today i tried one more time.
i flash this image and i applied --force-overwrite kernel-module-dvb-usb --force-overwrite kernel-module-dvb-usb-af9015
nothing, no usb tuner, i think that kernel-module-dvb-usb-af9015 is not working.
is there any way to force loading this module?
|
Top
|
|
|
|
|
#9992 - 11/01/16 11:23 AM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 07/31/15
Posts: 93
|
some info,
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2) dvb_usb_af9015: probe of 1-1:1.0 failed with error -2 usbcore: registered new interface driver dvb_usb_af9015
what now?
|
Top
|
|
|
|
|
#9993 - 11/01/16 12:10 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 07/31/15
Posts: 93
|
now i have cold state, but still no tuner in menu
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick ' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af 9015.fw' dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick ' in warm state. dvb-usb: will pass the complete MPEG2 transport str eam to the software demuxer. DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) DVB: Unable to find symbol af9013_attach() dvb-usb: no frontend was attached by 'Afatech AF901 5 DVB-T USB2.0 stick' Registered IR keymap rc-empty input: IR-receiver inside an USB DVB receiver as /d evices/platform/ehci-brcm.0/usb1/1-1/rc/rc0/input2 rc0: IR-receiver inside an USB DVB receiver as /dev ices/platform/ehci-brcm.0/usb1/1-1/rc/rc0 dvb-usb: schedule remote query interval to 500 msec s. dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successf ully initialized and connected. usbcore: registered new interface driver dvb_usb_af 9015 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 NET: Registered protocol family 10 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 eth0: no IPv6 routers present [LCD]:dbox_lcd_open
|
Top
|
|
|
|
|
#9994 - 11/01/16 02:29 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
Japhar Member
Carpal Tunnel
Registered: 10/22/10
Posts: 2640
|
We know the DigitalKey A867 works perfect, so why you just don't take one of these A867 instead ? TS P.S.: You can find them also here, http://www.japhar.com/japhar/
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
Top
|
|
|
|
|
#9996 - 11/01/16 02:45 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 07/31/15
Posts: 93
|
We know the DigitalKey A867 works perfect, so why you just don't take one of these A867 instead ? TS P.S.: You can find them also here, http://www.japhar.com/japhar/ i sold mine years ago, i will think about it... i think that i am close to fix af9015 on this image
|
Top
|
|
|
|
|
#10633 - 12/29/16 06:29 AM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
stranger
Registered: 01/19/16
Posts: 1
|
The Japhar team has great support and if they can support the VU+ solo range it will make alot of people happy smile .... openpli, atv, opensi new 2017... thanks
|
Top
|
|
|
|
|
#10634 - 12/29/16 10:53 AM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: nguyen huy]
|
Japhar Member
Carpal Tunnel
Registered: 10/22/10
Posts: 2640
|
;o) The Japhar team has great support and if they can support the VU+ solo range it will make alot of people happy smile .... openpli, atv, opensi new 2017... thanks
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
Top
|
|
|
|
|
#10946 - 01/31/17 01:42 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
bibo1
Unregistered
|
Hi Admin, hi Toysoft, I do have an Vu+solo clone, v3 I think-its nothing written within or outside the box. I installed the OpenPli for v3 above and it works. The prob is , that I cannot get the tuner recognized so no channals, no fun. Is there anything I can do to get it working- driver or so? Your help would highly be apreciated.
Greetings bibo1
|
Top
|
|
|
|
|
#10947 - 01/31/17 01:49 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
Japhar Member
Carpal Tunnel
Registered: 10/22/10
Posts: 2640
|
If you cannot get the Tuner recognized, then try the image V2 version, it should work.
TS
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
Top
|
|
|
|
|
#10948 - 01/31/17 03:08 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
bibo1
Unregistered
|
Thanks Taysoft for Your quick reply. The point is, that I already tried the v2 version but without success, after the installation and restart it gets stack during the boot with the following information at the HT:
Code: (Bad address in epc)
---[ end trace 1e44028d56280140 ]--- Kernel panic - not syncing: Fatal exception in interrupt Rebooting in 180 seconds..
bibo1
|
Top
|
|
|
|
|
#10983 - 02/03/17 10:38 AM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Admin]
|
bibo1
Unregistered
|
hi Admin, hi Toysoft, the last 3 days I tested allmost all images I could find here and on other forums -v2 and v3,v3a, without success. The v2 get the above error message in the HT as above mentioned. The only v3a I get into the box proper working, but no tuner working. I am not shure what kind of clone I have actually? Any further idea what else I can do? Because I just replace the PSU with the two step down units as they are discribed in Johnnys Forum and now the rest does not work properly, its a chame, isn't it?
|
Top
|
|
|
|
|
#11001 - 02/03/17 05:23 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Admin]
|
bibo1
Unregistered
|
Thanks Admin, I'll do. F we come to an workable result i let You know.
|
Top
|
|
|
|
|
#11896 - 04/21/17 10:46 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 03/01/16
Posts: 57
Loc: IT
|
ciao a tutti,
continuo con il vostro script....
che difetto e' se riavviando (menu_stanby/riavvio_riavviare)
il decoder vusolo riavvia perfettamente con DTT funzionante al 100x100
ma se si fa' (menu_stanby/riavvio_riavviare enigma*) non funziona il DTT...?
ce' qualcosa che non funziona cosa puo' essere.
_________________________
VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE Sim.Jahpar-DM.800HD clone_DM.800HD SE_ Mut@nt 51_4k _DM.920.4K_GBLU.UE.4K
|
Top
|
|
|
|
|
#11897 - 04/21/17 10:52 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
Japhar Member
Carpal Tunnel
Registered: 10/19/10
Posts: 9888
|
Provare la nuova versione Daily, http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=11879#Post11879I drivers sono lanciati al boot, dunque ben prima che enigma2 si carichi, se rilanciare enigma2 non cambia niente e normale, un reboot completo deve essere necessario se c'e un problema di drivers. Admin
_________________________
|
Top
|
|
|
|
|
#11898 - 04/21/17 11:00 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Admin]
|
VIP Japhar
journeyman
Registered: 03/01/16
Posts: 57
Loc: IT
|
ciao,
ma vedo per il vusolo dove non lo vedo
_________________________
VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE Sim.Jahpar-DM.800HD clone_DM.800HD SE_ Mut@nt 51_4k _DM.920.4K_GBLU.UE.4K
|
Top
|
|
|
|
|
#11900 - 04/21/17 11:20 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Admin]
|
VIP Japhar
journeyman
Registered: 03/01/16
Posts: 57
Loc: IT
|
ciao
o guardato ma ce' cosi'
DM500HD (Japhar Sim) :
Download here
DM800 (Japhar Sim) :
Download here
DM800se (Japhar Sim) :
Download here
DM8000 (Japhar Sim) :
Download here
**io cerco per il **vu SOLO**
_________________________
VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE Sim.Jahpar-DM.800HD clone_DM.800HD SE_ Mut@nt 51_4k _DM.920.4K_GBLU.UE.4K
|
Top
|
|
|
|
|
#11902 - 04/21/17 11:28 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Admin]
|
VIP Japhar
journeyman
Registered: 03/01/16
Posts: 57
Loc: IT
|
ciao,
devo aver un problema con Crome non mi fa vedere la
parte sotto della foto sim
vedo solo la parte sopre delle scritte dei Drembox ma sotto e' tutto nero strano mo vedo con Mozilla....al momento grazie.
_________________________
VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE Sim.Jahpar-DM.800HD clone_DM.800HD SE_ Mut@nt 51_4k _DM.920.4K_GBLU.UE.4K
|
Top
|
|
|
|
|
#11903 - 04/21/17 11:29 PM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
Japhar Member
Carpal Tunnel
Registered: 10/22/10
Posts: 2640
|
Devi fare F5 penso, forse ti mostra solo il cache, e dovresti ricaricare la pagina,
TS
_________________________
DM8000, DM800se, DM500HD, DM800HD, DM7025, DM7020s, DM7000, DM500s VU+ Solo, VU+ Uno, VU+ Duo, Kathrein UFS910 Tivusat, TNTSat, Fransat, SSR/TSR, BBC1-2-3/ITV DE-OpenBlackHole 1.4 image : http://www.openblackhole.com/
|
Top
|
|
|
|
|
#11904 - 04/22/17 12:28 AM
Re: VU+ Solo : OpenPLi 4.0 IPTV GStreamer 1.9.1.1 (V3)
[Re: Toysoft]
|
VIP Japhar
journeyman
Registered: 03/01/16
Posts: 57
Loc: IT
|
ciao,
fatto il tutto come metto il driver del DTT il decoder
non si avvia piu' ma il led del DTT rimane acceso blu che funziona,
non fa' piu' il boot,
mo provo la versione V2.
_________________________
VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE Sim.Jahpar-DM.800HD clone_DM.800HD SE_ Mut@nt 51_4k _DM.920.4K_GBLU.UE.4K
|
Top
|
|
|
|
|
|
|